Canada Samsung S6 Edge Plus SM-G928W8 Firmware Flash File (Stock ROM)

On this page, we have shared the download link and guide to install the Samsung SM-G928W8 (Canada Galaxy S6 Edge Plus) firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here you will find all stock firmware zip files for all the supported regions with Samsung SM-G928W8.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Canada Samsung S6 Edge Plus SM-G928W8 Firmware Flash File (Stock ROM)

Samsung Galaxy S6 Edge Plus SM-G928W8 (Canada) Firmware Flash Files:

Flash File Name: G928W8VLS6CRH1
Build Number: G928W8VLS6CRH1
Model: SM-G928W8
Android Version: 7.0 Nougat
Download
Flash File Name: G928W8VLS4CQK1_G928W8OYA4CQK1_BMC
Build Number: G928W8VLS4CQK1
Model: SM-G928W8
Android Version: 7.0 Nougat
Download

Steps to Flash Firmware File on Galaxy S6 Edge Plus SM-G928W8

Before we get straight to the steps to Install Stock Firmware on your Canada Galaxy S6 Edge Plus, let us take a look at the pre-requirements first.

Pre-Requirements: 

  • This Guide is for Samsung Galaxy S6 Edge Plus SM-G928W8 (Canada)
  • You need a Windows PC/Laptop and a USB cable to flash the firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy S6 Edge Plus.

Disclaimer:

We’re at GetDroidTips won’t be responsible for any kind of damage/error that occurs to your handset while/after following this guide or flashing any file. Proceed at your own risk.

Installation Guide

  1. Download the Samsung SM-G928W8 flash file
  2. Extract the contents of the firmware flash file zip.
  3. Launch the ODIN application
  4. Load the firmware files in their appropriate section
  5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  6. Notice that the CO port will light up on Odin once you connect your phone.
  7. Click the Start button to install the firmware on your Samsung device.
  8. That’s it! You will see a PASS message once the installation is complete.
Follow Complete Guidelines

Check out our full-depth video guide as well.

Video Tutorial To Install Firmware

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.