How to Fix Gray Zone Warfare Won’t Launch or Not Loading on PC

The first-person shooter game “Gray Zone Warfare” has gained considerable popularity and can be downloaded on the Steam platform. The game allows players to join a Private Military Company and explore a vast open world featuring both PvEvP and PvE modes. Success in the game requires players to strategize and survive against human operators and AI enemies while uncovering the mystery of Lamang Island. Although the game was released initially as an early access version, several PC gamers faced issues, including crashes, lags, stutters, and frame drops, regardless of their PC’s capacity.

After a few years, the full version of the game became available for PC users. However, one recurring issue experienced by many players is the game failing to launch. This is a problem that is reportedly experienced by Steam users, as per online forum reports. Additionally, some players reported facing the issue of the game not loading.

Gray Zone Warfare is a game that many people enjoy playing. However, some players have reported technical difficulties, such as the game not launching or loading correctly. These issues may be fixed by the game’s developer. If you are a PC user experiencing these problems, it is recommended that you seek support from appropriate forums or reach out to the game developer for assistance.

How to Fix Gray Zone Warfare is Not Responding or Loading on the PC

Luckily, some possible workarounds are mentioned below to fix the easily won’t launch or not loading issue. So, without wasting any more time, let’s jump into it.

Check System Requirements

Check out the system requirements of the Gray Zone Warfare game below to ensure that your PC configuration meets the game’s system requirements.

Minimum Requirements:

• Requires a 64-bit processor and operating system
• OS: Windows® 10 64 Bit (latest update)
• Processor: Intel® Core™ i5-8600 / AMD Ryzen™ 5 2600
• Memory: 16 GB RAM
• Graphics: NVIDIA® GeForce® GTX 1080 / AMD Radeon™ RX 5700 / Intel® Arc™ A770
• DirectX: Version 12
• Network: Broadband Internet connection
• Storage: 40 GB available space

Recommended Requirements:

• Requires a 64-bit processor and operating system
• OS: Windows® 10 64 Bit (latest update) / Windows® 11 64 Bit (latest update)
• Processor: Intel® Core™ i7-9700K / AMD Ryzen™ 5 3600X
• Memory: 32 GB RAM
• Graphics: NVIDIA® GeForce® RTX 3070 Ti / AMD Radeon™ RX 6800
• DirectX: Version 12
• Network: Broadband Internet connection
• Storage: 40 GB available space

1. Run the Launcher as an Administrator

First, you should try running the game launcher as an administrator on Windows to allow the launcher program and the game files to run properly. Not running the game or client as an administrator, you may find it pretty difficult to avoid crashes or not launching issues that require UAC (User Account Control) access. Ensure to follow the steps below to do so:

• Right-click on Steam Games Launcher exe shortcut file on your PC.
• Now, select Properties > Click on the Compatibility tab.

• Make sure to click on the Run this program as an administrator checkbox to checkmark it.
• Click on Apply and select OK to save changes.
• Now, you can double-click on the game exe file to launch it.

You can also do the same steps for the Gray Zone Warfare game executable file to ensure the application has UAC access.

2. Update Graphics Drivers

Make sure to update your graphics driver on the PC because an outdated GPU driver may trigger multiple issues with the game launching. You should try checking and installing the graphics driver update (if available). To do that:

• Right-click on the Start Menu to open up the Quick Access Menu.
• Click on Device Manager from the list to open the interface.
• Now, you’ll need to double-click on Display Adapters to expand it.

• Then, right-click on the dedicated graphics card that’s active.
• Next, click on Update driver > Choose Search automatically for drivers.
• The system will automatically check for the available updates.
• An update will automatically download and install the latest version if available.
• Once done, make sure to restart your PC to apply the changes.

If you can’t find any update, you can go to the official graphics card website and manually search for the update. If in case, a new version is available, download the file on your PC and install it. You can find the official manufacturer’s website link below.

• Nvidia GPU
• AMD GPU
• Intel GPU

3. End Background Processes

Make sure to end the background process on your system because unnecessary tasks can easily trouble the resource-hungry applications to run properly. If in case, your system becomes laggy or slow, the system resources are getting low at that moment. To remove unwanted processes:

• Press Ctrl + Shift + Esc shortcut keys on the keyboard to open Task Manager.

• Click on the Processes tab > Select the task you want to close individually.
• Then click on End Task to close it.
• As mentioned, do the same steps for each task you want to close.
• Once done, close the Task Manager window, and restart your PC.

4. Disable Steam Overlay

Multiple affected players have started reporting that Steam overlay is running in the background, which is troubling. In-Game overlay apps may consume higher system resources which can easily trigger issues with the game launching.

• Open the Steam client > Go to Library.
• Now, right-click on Gray Zone Warfare > Select Properties.
• Head over to the General section > Here just uncheck the Enable the Steam Overlay while in-game checkbox.
• Go back to Library > Launch Gray Zone Warfare to check if the game is still not launching.

5. Disable Steam Input

A couple of players did find this trick useful to simply disable the Steam Input option by following the steps below. It somehow fixes the game not launching or stuck at the loading screen issue. To do that:

• Launch the Steam client > Go to Library.
• Right-click on Gray Zone Warfare > Click on Controller.
• Set ‘OVERRIDE FOR Gray Zone Warfare’ to ‘Disable Steam Input’.
• Finally, you should try launching the game again to check for the issue.

6. Run the game in Windowed Mode

If in case, the game seems to crash a lot then you can try setting up the Display Mode to Windowed from Full Screen. To do that:

• Click on the Windows icon to open the Start Menu > Type %LOCALAPPDATA% on the search bar and open it.
• Go to the %LOCALAPPDATA% folder > Search for the ‘Prospect’ folder.
• Open the mentioned folder and go to the Saved > Config > WindowsNoEditor directory.
• Under the WindowsNoEditor folder, you’ll find a file called ‘GameUserSettings’.
• Open the user settings file using any text editor > Set ‘FullscreenMode=1’ to ‘FullscreenMode=0’ to save changes.
• Finally, try launching the game again to check for the issue.

7. Disable DirectX 12

If you use DirectX 12 on the PC, you can try turning it off. As the DirectX 12 version is the latest one available for Windows, it may be possible that your PC configuration isn’t capable of running it. To turn it off:

• Just head over to Settings > Video > Set ‘Enable DX12’ to ‘Off’.
• Restart Gray Zone Warfare game after applying changes.

8. Set Correct Rendering Device

Make sure to select the correct rendering device from the game settings menu that you can find below. To do so:

• Open the Steam client and then launch Gray Zone Warfare game > Go to the Video Settings menu from the game.
• Go to ‘Selected Rendering Device’ > Select your dedicated GPU. [Do not leave it to ‘Default’]
• Once done, reboot the game to save changes.

9. Disable Multi-Threaded Rendering

It seems that the in-game video settings menu in the Gray Zone Warfare title has a multi-threaded rendering option enabled, somehow conflicting with the game crashing quite often. Make sure to disable the multi-threaded rendering option from the game menu to try to resolve the issue. If using an AMD processor, turn it off and reboot the game to apply changes.

10. Turn Off Antivirus Protection

You should try turning off the Windows Defender protection on your PC to ensure no antivirus software is blocking the game files from running properly. To turn it off:

• Press the Windows + I shortcut keys to open the Windows Settings menu.
• Click on Update & Security > Click on Windows Security from the left pane.
• Now, click on the Open Windows Security button.
• Go to Virus & Threat Protection> Click on Manage settings.
• Next, you’ll need to turn off the Real-time protection toggle.
• If prompted, click on Yes to proceed further.

If you’re using any other antivirus program on your PC, turn it off. However, if you’re not interested in disabling the antivirus software on the PC, you can just whitelist the game files to the antivirus software. To do that:

• Open the Steam client > Go to Library.
• Click on Gray Zone Warfare from the list of installed games.
• Now, click the Settings icon next to the Gray Zone Warfare game page.
• Click on Manage > Go to Browse local files.
• Next, open the Prospect folder > Binaries > Win64.
• You’ll find a file, ‘Prospect-Win64-Shipping’ under the Win64 folder.
• Make sure to click to select the file and then add it to the list.
• You’re good to go.

11. Repair Game Files

A corrupted or missing game files on the PC can eventually trigger multiple issues with the game launching or performance. To do so:

• Launch the Steam client > Click on Library.
• Right-click on Gray Zone Warfare from the list of installed games.
• Now, click on Properties > Go to Local Files.

• Click on Verify Integrity of Game Files.
• You’ll have to wait for the process until it gets completed.
• Once done, just restart your computer.

Remember that verifying game files is an excellent troubleshooting step if you encounter issues such as crashes, performance problems, or missing content.

12. Update Gray Zone Warfare

If none of the methods worked for you, check for Gray Zone Warfare game update because an outdated game version can have bugs or stability issues. So, if you haven’t updated your game for a while, then follow the steps below to check for updates and install the latest update.

• Open the Steam client > Go to Library > Click on Gray Zone Warfare from the left pane.
• It’ll automatically search for the available update. If there is an update available, make sure to click on Update.
• Wait some time to install the update > Close the Steam client.
• Finally, reboot your PC to apply changes and launch the game again.

That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.