Portability is one of the key USPs of a Nintendo Switch console. You can take the device anywhere and enjoy your favourite game for up to six hours. This is what we expect from the console. But suddenly, all your excitement will turn into sadness when the device stops charging. Dozens of Nintendo Switch console users have reported the problem. If you are also in the same boat, keep reading this article, as we’ll walk you through several effective ways to fix the Nintendo Switch not charging problem.
There could be many reasons your Nintendo Switch console is not charging, such as a third-party charger, a faulty charger, system glitches, or a defective battery. Replacing the charger alone can solve the problem if you are using a third-party charger. Not only can it be very slow, but your device also may not detect the adapter sometimes. It is always recommended to use the original charger. In this guide, we’ll look at common troubleshooting steps to fix the charging issue on your Nintendo Switch console.
Nintendo Switch Not Charging, How to Fix?
If there’s no hardware damage on your console, one of the methods below is most likely to throw the charging problem away from your Nintendo Switch. Try the solutions below and check which one spells out success for you.
1. Keep the Device Plugged in for at Least 30 Minutes
If your Nintendo Switch console’s battery is completely drained, it might take a little more to show you the charging animation. You should keep the device plugged in for at least 30 minutes and check the charging status.
2. Reset the AC Adapter
If your AC adapter can’t charge your Nintendo Switch, the device might have a problem getting recognized by the console. To fix this, you should reset the AC adapter.
First of all, turn off your Nintendo Switch. Now, unplug the AC adapter from the wall outlet and the USB connector from the console. Leave the adapter fully disconnected for a minute. Plug the device back into the wall outlet and then connect the USB plug directly into the handheld.
If you see the charging animation on your console, leave it there for at least 3-4 hours. Once the battery is full, disconnect the adapter and use the console.
3. Reset Your Console
Resetting the console is one of the effective solutions to fix software-related issues on the device. It can fix the system glitches, which could be why your Nintendo Switch is not charging.
To reset your console, press and hold the power button for about 12 seconds and then release it. You can find the power button on the top-left corner of the handheld. Once the specified time completes, release the power button and press it again. Your console will reboot. Try connecting the adapter to the console and check if the charging issue is fixed.
4. Avoid Third-Party Chargers
Nintendo Switch has a USB Type-C port for charging. One might think that connecting any USB Type-C charger will do the job. Although it stands true with most chargers, not all can provide the same charging speed and safety. You must charge the Nintendo Switch using an original adapter because not all third-party adapters are strictly compatible with the Switch consoles.
5. Check for Hardware Damages
If you still can’t charge your Nintendo Switch, it’s more likely because of some hardware issues. Carefully inspect the console’s charging cable, adapter, and charging port. If you find a damaged part, there’s no other option than to replace it.
I hope this guide was useful to you in fixing the charging problem on your Nintendo Switch console. However, if the problem persists, you should contact Nintendo’s customer support for further diagnosis and replacement.