Advertisements

Oppo A53 CPH2127 ISP UFS PinOUT | Test Point | EDL Mode 9008

Oppo A53 is one of the newly launched budget category smartphones that offers trendy & nice-looking colors, a redesigned rear camera setup, punch-hole selfie camera embedded screen, a 20:9 aspect ratio display, and more. In this guide, we will show you the real image of the ISP UFS pinout and test point for the Oppo A53 CPH2127.

By using the ISP PinOUT, you can easily restore the stock ROM, bypass FRP lock, or reset user data on your device via UFi Box. In this guide, we will also guide you on how to reboot into 9008 EDL Mode.

What is ISP PinOUT?

ISP or In-system programming also known as in-circuit serial programming (ICSP) for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile, computer. You will find the IS Pinout connection on the logic board of your device. Therefore, you will need to remove the back panel of the handset and follow the below image to locate the pinout.

Oppo A53 ISP Pinout Image:

Oppo A53 CPH2127 ISP UFS PinOUT

Oppo A53 Specs Overview:

The device packs a bigger 6.5-inches IPS LCD panel with 720×1600 pixels resolution, a 90Hz refresh rate, Corning Gorilla Glass 3 protection, and more.

It’s equipped with an octa-core Qualcomm Snapdragon 460 SoC, Adreno 610 GPU, Android 10 (ColorOS 7.2), 4GB/6GB of RAM, 64GB/128GB of onboard storage capacity, a dedicated MicroSDXC card slot, a massive 5000mAh battery, 18W fast charging support, a rear-mounted fingerprint sensor, an ambient light sensor, an accelerometer, gyroscope, proximity, compass sensor, etc.

While talking about the cameras, the Oppo A53 sports a triple rear camera setup that includes a 13MP (wide, f/2.2) + a 2MP (macro, f/2.4) + a 2MP (depth, f/2.4) lens. It also packs PDAF, HDR, Portrait, Panorama, AI modes, an LED flash, etc. On the front side, the handset features a 16MP selfie camera that has HDR, Bokeh mode, AI Beauty mode, etc.

The device offers a 3.5mm audio jack, Wi-Fi 802.11 a/b/g/n/ac (dual-band), Bluetooth 5.0, GPS, A-GPS, GLONASS, GALILEO, BDS, FM Radio, USB Type-C port, etc.

How to Enter EDL Mode on Oppo A53 (CPH2127)

Follow this instruction carefully to boot your device into EDL Mode (aka Emergency DownLoad Mode)

Method 1: Using ADB

  • Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
  • Connect your device to your PC
  • Open the adb command and enter the command
    .\adb reboot edl

Method 2: Using Fastboot

  • Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
  • Boot your device into bootloader
  • Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
  • now enter the command
    .\fastboot oem edl

Method 3: By Hardware Test Points / Restore Your device

  • Download the QDLoader driver
  • Find the EDL PinOUT/Test Point on your device (refer image above to find the test point)
  • To enter EDL mode, you need to use a metal tweezer or a conductive metal wire to short the points.
  • Once you are done, connect your device to PC using USB cable
  • This way, your device will enter EDL mode. Now you can open the QFil or QPST Tool to flash the firmware and restore your device.

I hope this guide was helpful to find the Oppo A53 CPH2127 ISP Testpoints.

Advertisements

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.