Download Samsung F13 SM-E135F Firmware Flash File

Samsung Galaxy F13 has launched in India with Exynos 850 SoC along with 4GB of RAM and features a 6.6-inch full HD+ display. The device runs on  Android 12 with MIUI 13 on top. Samsung Galaxy F13 sports a triple rear camera setup that houses a 50 MP primary sensor, along with a 5 MP ultra-wide shooter and a 2 MP depth sensor.

On this page, we have shared the download link and guide to installing the Samsung SM-E135F (Galaxy F13) binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here you will find all stock firmware zip files for all the supported regions with Samsung SM-E135F.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Samsung Galaxy F13 Device Overview:

The Samsung Galaxy F13 features a 6.6 inches LCD panel with a 60 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2408 pixels and an aspect ratio of 20:9. Under the hood, we get the Exynos 850 processor built on an 8nm manufacturing process. It is an octa-core processor with four Cortex-A55 cores clocked at 2.0 GHz and four Cortex-A55 cores clocked at 2.0 GHz. For handling the graphics-intensive tasks, we have the Mali-G52. The smartphone comes with Android 12 out of the box with One UI Core 4.1 skin running on it.

In optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup consists of a 50 MP primary sensor paired with an f1.8 lens, a 5 MP ultrawide sensor paired with an f/2.2 lens, and a 2MP depth sensor paired with an f/2.4 lens. The selfie camera at the front is an 8 MP primary sensor paired with an f/1.8 lens. The front and rear camera systems are limited to 1080p video recording.

The smartphone comes in two storage options: 64GB internal storage + 4GB RAM and 128 GB internal storage + 4GB RAM. We also get a dedicated microSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, NFC, FM radio, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, and compass. Powering it all is a 6000 mAh battery that can be topped up quickly using a 15 power adapter. The smartphone is available in three color options: Waterfall Blue, Sunrise Copper, and Nightsky Green.

Samsung Galaxy F13 SM-E135F Flash Files:

Steps to Install Firmware File on Galaxy F13 SM-E135F

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy F13, let us take a look at the pre-requirements first.

Pre-Requirements:

• This Guide is for Samsung Galaxy F13 SM-E135F
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at the Steps to flash the firmware file on Samsung Galaxy F13.

Instructions to Install:

1. Download the Samsung SM-E135F flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines

Check out our full-depth video guide as well.

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.