On this page, you will find the official stock firmware file for the Sony Xperia XZ1 (G8341, G8343, G8342), drivers, and flash tools. Also, we will guide you on how to install the Sony G8341, G8343, G8342 (Sony Xperia XZ1) flash file using the Sony Xperia Flash tool.
By flashing the Stock ROM file, you can always fix the device software issue such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, and many more.
About Sony Xperia XZ1:
Sony Xperia XZ1 features a 5.2-inches display with a screen resolution of 1080 x 1920 pixels with Corning Gorilla Glass 5 protection. The smartphone is powered by Octa-core (4×2.35 GHz Kryo & 4×1.9 GHz Kryo) and Qualcomm MSM8998 Snapdragon 835 processor coupled with 4GB of RAM. The phone packs 64GB internal memory which can also be expanded up to 256GB via microSD card. The camera on the Sony Xperia XZ1 comes with a 19MP rear Camera with EIS (gyro), predictive phase detection and laser autofocus, LED flash, and a 13MP front shooting camera.
Sony Xperia XZ1 runs on Android 8.0 Oreo out of the box and a Non-removable Li-Ion 2700 mAh battery with Fast battery charging (Quick Charge 3.0). It also has a fingerprint sensor on the side. The handset supports a dual sim with 4G on both slots. It comes with connectivity options such as Bluetooth, Wifi, USB OTG, FM, 3G, and 4G.
The Advantage Of Stock Firmware
- Flash Stock To Unbrick your Sony Xperia XZ1
- Flash Stock ROM to Fix the Bootloop problem
- Upgrade and Downgrade Sony Xperia XZ1
- Unroot or Fix Bugs on your phone
- To fix the lag or stutter on Sony Xperia XZ1
- By flashing Stock ROM, you can solve software problems.
- Revert back to stock to gain your warranty.
List of Sony Xperia XZ1 Firmware File collection
FTF Firmware Installation Guide
Step-1 Download the firmware file and copy it to the device storage.
Step-2 Now open the Sony Flashtool on your PC/Laptop.
Step-3 Switch off your phone and hold the Volume Down button. At the same time holding the Vol Down, connect the phone to the PC via USB Cable.
Step-4 Now on the PC your phone will be detected by the Sony Flashtool window.
Step-5 Now in the Flashtool, Tap on Flash device > Flash mode.
Step-6 Now browse and select the firmware file from the folder where you’ve moved it.
Step-7 We will follow a clean install. This means we have to wipe out data. To do it, select the Wipe, Userdata, and app_log options.
Step-8 Tap on the OK button and wait for the firmware to load completely.
Step-9 Now the installation process will begin. So you should wait for a few minutes until the update completes and the device reboots.
Let us know your feedback on this latest update In the comment section below.