How to Install Stock Firmware on MX10 Pro TV Box [Android 8.1/9.0 Pie]

Updated on February 10, 2019:Finally  MX10 Pro TV Box receives Android 9.0 Pie update. You can now upgrade the Android 9.0 Pie Stock Firmware on MX10 Pro TV Box.

Here we have shared the files to download and install Stock Firmware on MX10 Pro TV Box which is powered by a Rockchip RK3328 / RK322H processor. MX10 Pro TV Box comes packed with Android 8.1 Oreo firmware with 4GB DDR4 RAM and 32GB ROM. The device brings with support for the 4K resolution, Bluetooth 4.1, and 2.4G + 5G WiFi 100Mbps. If you are looking for MX10 Pro TV Box Stock Firmware, then you are in the right place.

Don’t worry, you know sometimes things do not go too well with Android Box TV. One of the easiest and quick fixes for most of the issues on the Android Box TV is just installing Stock ROM on MX10 Pro TV Box. So, today, in this post, we would be covering on How to Install MX10 Pro TV Box Stock Firmware. Now, if that sounds interesting, let us top into it. Should we?

Main Features

Advantages of Installing Stock ROM

Here are some of the advantages of installing stock ROM on your MX10 Pro TV Box:

• You can unbrick your bricked device.
• Fix the boot loop issue by installing the Stock ROM.
• To upgrade or downgrade.
• To fix bugs lags on your Android Device.
• This Software Update helps to solve the issue with WiFi, Bluetooth and more.

So, now let us move on to the MX10 Pro TV Box Stock Firmware section. Should we?

Download Firmware:

Steps to Install Stock Firmware on MX10 Pro TV Box

Now, before we get straight to the Steps to Install Stock Firmware for MX10 Pro TV Box, let us take a look at some of the prerequisites.

Prerequisites

• Please note that this guide will work only with the MX10 Pro TV Box.
• You should have a formatted SD Card for this guide.
• Download Rockchip Batch Tool v1.8
• Download Rockchip Driver Assistant v4.

Once you have the above prerequisites, you can proceed to Instructions to Install MX10 Pro TV Box Stock ROM.

Instructions to Install:

Here are the instructions you need to follow in order to install Stock Firmware on MX10 Pro TV Box :

So that’s it guys, this was our take on How to Install Stock Firmware on MX10 Pro TV Box [Stock ROM Flash File]. We hope that you found this post useful. Let us know what do you guys think about it in the comments section down below.