Here we will share the Teclast P10 Stock Firmware Files. Teclast P10 is a great budget tablet which is powered by 1.5 GHz Octa-core Rockchip RK3368 with 2GB of RAM and runs under Android 7.1 Nougat. But, there is nothing in this world which is perfect, Right? Sometimes things do not go too well with Android Devices. It looks like that you are also facing some issue on your Teclast P10. So here we will guide on how to flash the Stock ROM on Teclast P10.
Well, you might be facing the lagging issue, or maybe you tried to root your Teclast P10 which did not go too well and you end up bricking your device. Whatever the case might be, one of the best solution to fix your Teclast P10 is by installing or flashing Stock ROM back on it. You can consider flashing Stock ROM like doing a Factory Data Reset on your Teclast P10 running on stock ROM.
Sounds interesting? So download the Teclast P10 Stock Firmware Files and flash it on your tablet.
How to Install Stock ROM on Teclast P10
In this guide of GetDroidTips, we have mentioned some really easy steps to Install Stock ROM on Teclast P10. This guide is not at all difficult to follow and is written in beginner’s friendly language. You need to follow the guide in order. Here is how it goes, first of all, you need to download the firmware file and the Rockchip Batch Tool for the Teclast P10 on your PC or Laptop.
Once that’s done, you wanna take a look at the prerequisites section just to confirm that you have all the prerequisites required to Install Stock ROM on Teclast P10. Once you have all the prerequisites, you can follow each step carefully to Install Stock ROM on Teclast P10. Let us now take a look at the Advantages of Installing Stock ROM on your Teclast P10. Should we?
Advantages of Installing Stock ROM
Here are some of the advantages of installing stock ROM on your Teclast P10:
- You can unbrick your bricked Teclast P10.
- Fix the boot loop issue by installing the Stock ROM.
- To upgrade or downgrade your Teclast P10.
- To fix bugs lags on your Android Device.
- Other fixes.
So, now let us move on to the Download Firmware for Teclast P10 section. Should we?
- Device Supported: Teclast P10
- Tool Supported: Rockchip Batch Tool
- Processor: Rockchip RK3368
- OS: Android 7.1.2 Nougat
|Download Here||P10 octa core (M3F4) _V2.04_SZ.rar|
Steps to Install Stock Firmware on Teclast P10
Now, before we get straight to the Steps to Install Stock Firmware on Teclast P10, let us take a look at some of the prerequisites.
- Please note that this guide will work only with the Teclast P10.
- You should have a Windows Laptop or PC for this guide.
- Make sure that your Teclast P10 has at least 60% charge left.
- It is always recommended to take a backup of your tablet.
- Download Rockchip Batch Tool and install on your PC.
Once you have the above prerequisites, you can proceed to Instructions to Install Stock ROM on Teclast P10.
GetDroidTips will not be responsible for any internal/external damages to the device that may happen while/after following this guide.
Instructions to Install Stock ROM on Teclast P10
Here are the instructions you need to follow in order to install Stock ROM on the Teclast P10 :
Guide to Install Stock ROM using Rockchip Batch Tool
So that’s it guys, this was our take on How to Install Stock ROM on Teclast P10 [Firmware Flash File]. We hope that you found this post useful. Let us know what do you guys think about it in the comments section down below.