Tecno Pouvoir 3 Plus LB8 launched in August 2019 with a 6.35-inch AMOLED display, MT6762 Helio P22 chipset, 6000 mAh battery, 64 GB storage and 6GB RAM. Now, if you’re using the Tecno Pouvoir 3 Plus device and facing issues like authentication or buffer error, you will need to fix it via the SP Flash Tool or Miracle Box or CM2 box. But if you don’t fix it, you will encounter a secure boot error. In order to flash those devices, you will require a Secure Boot DA file. Here you can download and install Tecno Pouvoir 3 Plus MTK Secure Boot DA file.
If your MediaTek powered Android device got corrupted or bricked, you will require a Download Agent file to access its onboard storage and fix it. Here in this guide, we will share with you the steps to install the Download Agent (DA) files for your device. The boot file or firmware file is also known as the DA file. The DA file is necessary to flash any file into a sucre boot enabled MTK device.
Table of Contents
TECNO Pouvoir 3 Plus Device Overview
TECNO Pouvoir 3 Plus was announced in August 2019 which sports a 6.35-inch IPS LCD display with a screen resolution of 720 x 1548 pixels.
TECNO Pouvoir 3 Plus is powered by an Octa-core 2.0 GHz Cortex-A53 with Mediatek MT6762 Helio P22 (12 nm) chipset coupled with 6GB of RAM and 64GB of internal storage. It also supports an external memory card with up to 128 GB microSD. The device came out of the box with Android 9.0 Pie under HIOS 5.0 and backed by a 6000 mAh battery (Non-removable).
As far as the camera concerned, the device has a single-camera setup with 13MP primary sensors and a selfie camera with a 13MP lens. Other connectivity option includes 4G, GPS, Bluetooth, Mobile Hotspot, accelerometer, proximity sensor, and compass, etc.
Advantages of Download Agent Loader Files
- Bypass Factory Reset Protection (FRP Lock) on the Tecno Pouvoir 3 Plus
- System Image backup of the Tecno Pouvoir 3 Plus
- Read security codes of an MTK device
- Can flash new firmware on a Tecno Pouvoir 3 Plus
- Clone a Recovery Image or boot files
- This DA file is supported for the Tecno Pouvoir 3 Plus device only.
- You’ve to download the DA file for your Tecno Pouvoir 3 Plus device from the link above.
- A PC/Laptop and a USB cable are required.
Steps to Install Tecno Pouvoir 3 Plus MTK Secure Boot DA auth File
Method 01: Use NCK Box
- Download NCK Pro Box | NCK Pro Box Drivers – Install both on your PC
- Launch the NCK box on your PC > Click on FRP-PATTERN-PRIVACY-RESET.
- Click to select Custom Loader.
- Then head over to the DA file and select the downloaded DA file.
- Click on Flash Mode.
- Next, open NCK Loader > Click on Settings.
- Head over to the DA file and select the downloaded DA file.
- Go back to the Service tab > Click on Reset.0
- Y0ur Tecno Pouvoir 3 Plus will now reboot with reset FRP lock system
For a complete step by step guide on how to install DA file using NCK Pro Box
Method 02: Use SP Flash Tool
- Launch the SP Flash Tool on your PC.
- Click on the Download tab.
- Click on the Choose option and select the downloaded DA file.
- The DA file will load automatically and install it.
For a complete step by step guide on how to install the DA file using SP Flash tool
Method 03: Use Miracle Box
For a complete step by step guide on how to install the DA file using Miracle Box
That’s it, guys. We hope you’ve successfully installed the DA file on your Tecno Pouvoir 3 Plus LB8 device. For any queries, feel free to ask in the comments below.