Fix: Beats Studio 3 Not Showing Up on Bluetooth

Apple’s Beats Studio 3 is one of the most demanding headgears among the youngsters. This is because beats Studio 3 has everything that a new generation user needs. But unfortunately, on Apply forum, many users started complaining that the Beats Studio 3 is not working or not showing up on their Bluetooth device. However, even the worst news is that the developer is still not mentioned anything about this issue. Therefore, it might be possible that the issue may not be worldwide.

But, you don’t need to scratch your head while thinking about how you can now resolve this issue. Yes, we will help you resolve the Beats Studio 3 not showing up on the Bluetooth issue. The following solutions have the potential to resolve this error. So, make sure to perform the fixes mentioned below.

How To Fix Beats Studio 3 Not Showing Up on Bluetooth

Fixing the Beats Studio 3 not showing up on the Bluetooth issue isn’t really a tough thing to do; you can do so just by performing these fixes. Therefore, make sure to follow the same as we have mentioned below:

Fix 1: Turn Off/On Your Headset

We recommend that you power on and off your Beats Studio 3 headphones. If these temporary bugs are removed, all of their related issues will be resolved. Thus, we advise you to restart your headset by using the power on/off button as soon as possible. After that, check whether it shows up or not.

Fix 2: Reboot Your Device

It is possible that your Beats Studio 3’s issue is caused by the system you are connecting it to. There is a possibility that some corrupted temporary files on your device prevent your headset from showing up on your device’s Bluetooth list.

However, these files are automatically deleted when the device is rebooted.

So, after that, you need to reconnect your headset if the headset isn’t appearing. Many users have reported that this has helped them to resolve this issue, and your Beats Studio 3 should start showing up on Bluetooth again.

Fix 3: Check The Batteries

Did you check if the Beats Studio 3 batteries are working properly or not? Well, chances are there that the batteries might get damage due to which it is not functioning properly and showing you this kind of error.

However, to check the batteries, you can simply charge it and check its time to fully discharge. If it gets discharged in just a few hours, then this means its batteries are damaged, and you require to replace them with the new ones. 

Fix 4: Make Sure No Other Bluetooth Device is Connect To Your Device

If you are using other Bluetooth devices on your PC, such as a mouse or keyboard, we suggest you disable them and connect the Beats Studio 3 and reconnect them. Yeah! I know it may sound weird, but it is the best solution as it has been reported by many users that it has helped them resolve such issues. So, you must try this out to see the magic. 

Fix 5: Reset Your HeadSet

If none of the above solutions work, resetting your Beats headphones might also be necessary. This could be a software issue. Resetting these headphones might resolve the problem. Afterward, it should work normally. Here are the steps you require to take to fix the issue with Beats Studio 3 headphones not showing up on your Bluetooth device.

1. Press and hold both the power and volume buttons simultaneously.
2. Release the buttons when the Fuel Gauge flashes.
3. That’s it. The gauge has been reset. Now, the not showing on Bluetooth issue has been resolved automatically. 

Fix 6: Charge It

Does your Beats Studio 3 have a full charge? It’s easy to check the battery level of your headset by using the battery indicator. Nevertheless, if you find that the battery in your Beats headphones has run down, you must first charge it for a bit (around 2-3 hours) and then try connecting it again and check if it starts appearing on your device or not. This may sound strange, but a low battery can sometimes be the main culprit. So, try this and check if it helps or not.

Fix 7: Check If Your Device OS is Updated

You should also check if your device’s OS is updated or not. This is because sometimes, an older OS also causes this kind of issue. Therefore, depending upon your device, you can update your OS and then again check if the Beats Studio 3 not showing on the Bluetooth issue gets resolved. 

Fix 8: Update the Driver

Updated drivers are essential for maintaining a computer’s performance; outdated drivers can adversely affect performance. But, in most cases, users don’t realize they need to update or manage their drivers until they are experiencing trouble. As a result, most people believe updating drivers won’t benefit them.

Therefore, it is probable that your audio driver is outdated, which results in Beats Studio 3 not showing. Next, check to see if you need to update your Bluetooth driver. To do so, follow these steps.

1. To begin, double-click the Bluetooth tab in the Device Manager. 
2. Select the Update Driver option from the menu after right-clicking the Bluetooth device name.
3. Allow the update to be complete. Then, check if the not showing on the Bluetooth issue gets resolved. 

Fix 9: Check For Damage

Your headphone might get damaged internally if you drop them previously, which may result in some parts of the headset malfunctioning.

To ensure that your headset’s body is not damaged, please thoroughly inspect it for any exterior damage. Regardless, if you come across any, you should immediately contact the nearest Apple service center so that they can repair them.

Fix 8: Reach Service Center

Please do not hesitate to get in touch with the support team if you have tried everything we have suggested here to fix the Beats Studio 3 not showing up on the Bluetooth issue here in this guide.

Describe the error to them as much as possible. They will undoubtedly offer some suggestions for fixing it. Otherwise, you will have to bring your headphones to their nearest repair shop.

This concludes our instructions on how to fix the Beats Studio 3 not showing up on the Bluetooth issue. After following the above methods, we hope you can now resolve this error. We will love to hear your thoughts about this topic in the comments below if you have any more questions.