Download Samsung Galaxy Z Flip 5 Firmware Flash File (SM-F731B)

Samsung’s new Galaxy Z Flip 5 is a major upgrade from its predecessor, the Galaxy Z Flip 5. The device features an innovative Flex Hinge, a larger cover display, and a custom Snapdragon 8 Gen 2 version with an overclocked CPU and GPU for improved performance. The phone has a powerful 3,700mAh battery.

On this page, we have shared the download link and guide to installing the Samsung SM-F731B (Galaxy Z Flip 5) binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here, you will find all stock firmware zip files for all the supported regions with Samsung SM-F731B.

If you are someone who wants to restore the device to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issues, fix lag or stutter, or even you can downgrade the device anytime.

Samsung Galaxy Z Flip 5 Device Overview:

The Samsung Galaxy Z Flip 5, a dual-SIM device supporting Nano and eSIM, is powered by Android 13 with OneUI 5.1.1 and features Armor Aluminum frames. Its display is a 6.7-inch full-HD+ Dynamic AMOLED 2X Infinity Flex inner screen with a 120Hz adaptive refresh rate. The primary display mirrors last year’s model, but the device now sports a significantly larger 3.4-inch Super AMOLED cover display. Both the display and rear panel are safeguarded by Corning Gorilla Glass Victus 2.

Under the hood, the Galaxy Z Flip 5 is equipped with a custom Snapdragon 8 Gen 2 Mobile Platform for Galaxy, bolstered by 8GB of RAM. This exclusive chipset version features overclocked CPU and GPU cores. The camera system consists of a dual rear unit: a 12-megapixel ultra-wide primary sensor and a 12-megapixel wide-angle camera. The 10-megapixel selfie camera is placed on top of the folding display.

The device offers 256GB and 512GB storage options, and a plethora of connectivity options including 5G, 4G LTE, Wi-Fi 6E, Bluetooth 5.3, GPS/ A-GPS, NFC, and a USB Type-C port. Although it lacks dust resistance, it features an IPX8-rated build and several sensors including an accelerometer, barometer, gyro sensor, and a side-mounted fingerprint sensor. The Galaxy Z Flip 5 is powered by a 3,700mAh battery supporting 25W fast charging and wireless charging options.

Samsung Galaxy Z Flip 5 SM-F731B Flash Files:

Steps to Install Firmware File on Galaxy Z Flip 5 SM-F731B

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy Z Flip 5, let us look at the pre-requirements first.

Pre-Requirements: 

• This Guide is for Samsung Galaxy Z Flip 5 SM-F731B
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at the Steps to flash the firmware file on Samsung Galaxy Z Flip 5.

Instructions to Install:

1. Download the Samsung SM-F731B flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines

Check out our full-depth video guide as well.

We hope that this guide will be helpful to you. If in case you’re facing any issues, feel free to ask in the comments below.