Download Samsung Galaxy Z Fold 5 Firmware Flash File (SM-F946B)

Samsung’s latest innovation in foldable smartphones – the Galaxy Z Fold 5 – features a large 7.6-inch AMOLED inner display, a 6.2-inch cover screen, and a Qualcomm Snapdragon 8 Gen 2 chipset. It has a refresh rate of up to 120Hz and a Flex Hinge with a dual rail structure for better durability.

On this page, we have shared the download link and guide to installing the Samsung SM-F946B (Galaxy Z Fold 5) binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here, you will find all stock firmware zip files for all the supported regions with Samsung SM-F946B.

If you want to restore the device to factory firmware, this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issues, fix lag or stutter, or even you can downgrade the device anytime.

Samsung Galaxy Z Fold 5 Device Overview:

The Samsung Galaxy Z Fold 5 is a dual-SIM device, supporting either Nano or Nano+eSIM. It runs on the Android 13-based One UI 5.1.1, promising four OS upgrades and five years of security updates. The handset features a 7.6-inch QXGA+ Dynamic AMOLED 2X Infinity Flex Display on the inside, boasting a pixel density of 374ppi and a 12.6:18 aspect ratio. The adaptive refresh rate ranges between a gentle 1Hz and an impressive 120Hz, making for a smooth, crisp visual experience.

In addition to its inner display, the Galaxy Z Fold 5 also offers a 6.2-inch full-HD+ external Dynamic AMOLED 2X Display. This secondary screen has a pixel density of 412ppi and a 23.1:9 aspect ratio, with an adaptive refresh rate that oscillates between 48Hz and 120Hz. The device is powered by a Snapdragon 8 Gen 2 Mobile Platform for Galaxy chipset, complemented by 12GB of RAM, ensuring a powerful, efficient performance.

The Galaxy Z Fold 5 comes equipped with an advanced camera setup. The rear features a trio of cameras: a 50-megapixel wide-angle camera with dual pixel autofocus, optical image stabilization (OIS), and an f/1.8 aperture; a 12-megapixel ultra-wide-angle camera with an f/2.2 aperture; and a 10-megapixel telephoto camera with phase detection autofocus, OIS, and an f/2.4 aperture. A 10-megapixel camera on the cover display and a 4-megapixel under-display camera on the inner screen cater to selfies and video chats. Finally, the device is powered by a 4,400mAh battery, offering fast charging and wireless power-sharing capabilities.

Samsung Galaxy Z Fold 5 SM-F946B Flash Files:

Steps to Install Firmware File on Galaxy Z Fold 5 SM-F946B

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy Z Fold 5, let us look at the pre-requirements first.

Pre-Requirements: 

• This Guide is for Samsung Galaxy Z Fold 5 SM-F946B
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s look at the Steps to flash the firmware file on Samsung Galaxy Z Fold 5.

Instructions to Install:

1. Download the Samsung SM-F946B flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines

Check out our full-depth video guide as well.

We hope that this guide will be helpful to you. If in case you’re facing any issues, feel free to ask in the comments below.