Download Samsung Galaxy XCover 7 Firmware Flash File

On this page, we have shared the download link and guide to installing the Samsung Galaxy XCover 7 binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here, you will find all stock firmware zip files for all the supported regions with Samsung Galaxy XCover 7.

In case you’re looking to reset your device to its factory firmware, you’ve come to the right place. With the help of this guide, you can resolve any software-related problems you might be facing, such as hard or soft bricking, WiFi or Bluetooth connectivity issues, lag, stutter, and even downgrade your device whenever needed.

Samsung Galaxy XCover 7 Device Overview:

The Samsung Galaxy XCover 7, released in January 2024, is a rugged smartphone designed for durability in harsh environments. It features a sturdy build, measuring 169 x 80.1 x 10.2 mm and weighing 240g. With an IP68 rating, it is water and dust-resistant up to 1.5 meters for 35 minutes, and is drop-resistant from up to 1.5 meters, meeting MIL-STD-810H compliance for enhanced durability. The device sports a 6.6-inch PLS LCD display with 1080 x 2408 pixel resolution and 600 nits brightness, protected by Corning Gorilla Glass Victus+ for extra screen durability.

It is powered by the MediaTek Dimensity 6100+ chipset with an octa-core CPU and Mali-G57 MC2 GPU, running on Android 14 with One UI 6. Storage options include 64GB with 4GB RAM and 128GB with 6GB RAM, with a dedicated microSDXC slot for additional storage.

The camera setup is simple but effective, featuring a 50 MP wide main camera with PDAF for clear shots, aided by a dual-LED flash, and capable of recording 1080p video at 30fps. The 5 MP front camera handles selfies and video calls. The phone includes a 4050 mAh removable battery with 15W wired charging, offering the convenience of replacing the battery when needed.

Connectivity features include Wi-Fi dual-band, Bluetooth 5.3, NFC, and a USB Type-C 2.0 port with charging connector pins. With its rugged design, water resistance, and durable build, the Galaxy XCover 7 is ideal for users working in demanding outdoor or industrial environments.

Samsung Galaxy XCover 7 Flash Files:

Steps to Install Firmware File on Galaxy A06

Before we proceed with the steps to install the Stock Firmware on your Samsung Galaxy XCover 7, let’s take a look at the prerequisites.

Pre-Requirements: 

• This Guide is for Samsung Galaxy XCover 7
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at the Steps to flash the firmware file on Samsung Galaxy XCover 7.

Instructions to Install:

1. Download the Samsung Galaxy XCover 7 flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines | Video Tutorial

We hope that this guide will be helpful to you. If you’re facing any issues, feel free to ask in the comments below.