It won’t take a minute before the water reaches in the internal assembly and cause water damage to your smartphone. Read along to know how to fix Huawei Water damaged smartphone which is applicable to all other smartphones as well. Smartphones are highly sophisticated but at the end of the day, these are electronic devices and these are highly sensitive. Without proper protection, it won’t take a minute for the water to seep into the internet assembly and destroy the motherboard or other components of your phone.
If you are looking for a guide on how to fix a water damaged smartphone or just want to brush up your skills with the knowledge so that in case if your phone is water damage, you can take necessary actions to prevent it from getting totally damaged. There are some don’ts and do’s that you must know when you accidentally drop the phone in a pool or any water body, etc.
How to Fix Huawei Water Damaged Smartphone?
- Don’t panic
If the phone is submerged under water or say you spilled water on it, don’t panic and keep the phone on a dry surface.
- Don’t turn it ON
If the phone is still turned ON, keep the phone on a dry surface and press the power button to turn it OFF. However, if the phone is turned OFF, do not attempt to turn it ON.
- Don’t shake or press any keys
Shaking the phone or pressing any keys, both have an adverse effect on water needs a tiny place to pass. This means that even if the water hasn’t reached the internal assembly, it could reach if you shake it or press any buttons or so.
- Don’t blow or heat up the phone
Water evaporates when heated up. But since there is no way out, the water will still remain inside the phone and might cause damage if you keep on heating it. Similarly, do not blow air using your mouth or blower as it can force the water deep into the internal components and that will surely burn a hole in your pockets.
What do you need to do?
- Disassemble the phone
It is the first thing you need to do. When the phone is water damaged, every second count. Take the phone and remove the SIMs, memory card, back cover and the battery out and keep it on a dry surface and let it dry. You can take a clean and dry cloth to soak the water off the disassembled components. Keep the phone aside until you go through the next step.
- Dry out the exterior
Use a paper towel, tissue, or alcohol to dry off the exterior of the phone. Ensure that you don’t shake the phone much or else the water could cause further damage to your smartphone. You need to soak any water from the audio jack, SIM and memory slots, and then from the battery compartment if the phone has a removable battery. Be gentle and do not shake the phone.
- Use a vacuum cleaner to suck out the water
Next step is to take a vacuum cleaner and suck out excess water from the audio jack, SIM and memory card slots, buttons, bezel, around the battery and other parts of the phone using a lighter setting on the vacuum cleaner.
- Ziplock the phone in rice & let it dry
Rice is one of the best moisture absorbents that you can utilize to curb the Huawei water damaged smartphone. What you need to do is take the phone and put it in a ziplock bag. Now, fill the ziplock bag completely with rice and zip the bag. Keep the ziplock bag in a safe and secure place for 2 to 3 days. Note that many of the users who use this technique usually check if the phone has dried up or not but it is not the right method.
You need to understand that when you put the phone into a bag of rice, keep it inside the bag for few days without interfering with it. After 3 days, take the phone out of the ziplock bag and voila, all the moisture and water in the smartphone has dried up completely.
- The final countdown
After taking out the phone from the ziplock bag, plug the battery (if it was removable), and then, try to turn ON the phone. If the phone vibrates without any display, there is a possibility that the battery has completely drained. Plug the phone with a charger and keep it idle for 10 to 15 seconds. Now, try to boot up the phone again. Note that the chances of reviving a water damaged smartphone which didn’t have any water resistant coating or cover, only a handful of such devices are left undamaged by water.
If you are lucky enough, the phone might turn ON with little or no damage. Check the screen for any blurred spot or insensitive region on the touchscreen as it can reveal if there is any potential damage to the touchscreen or not. There is another possibility that even after your phone dipped into the pool, only the battery got damaged. If it is so, check the battery with any other smartphone and check if is it working or not.
What to do to prevent water damage in the future?
If you are one of the millions of skeptics about water damage to your smartphone, there are several things you can do to prevent any potential damage. Water resistant smartphone with IP67 or IP68 coating or with a third-party coating can help prevent water damage to your smartphone. Another way to protect the phone from potential water damage is to use water resistant phone covers can help you avert potential water damage. Note that it is highly unlikely that all the users utilizing this guide can fix their water damaged smartphone since water has a long-lasting effect on electronic devices and phones are highly sensitive and prone to water damage.
- How to fix Xiaomi Mi Water Damage Issue? [Quick Guide]
- Things to do when you have a water-damaged Android Phone
- How to Fix Bluboo Water Damaged smartphone [Quick Guide]
- How to Fix Evercoss Water Damaged Smartphone Using This Quick Guide!