How to Install Stock ROM on Galaxy S20+ 5G SM-G986B (Firmware Guide)

Advertisements

In this article, we have shared the instruction and download link to install the official flash file on Samsung Galaxy S20+ 5G SM-G986B. To flash the firmware file, you need to install the Samsung Flash Tool (Also known as Odin Flash Tool) on your computer.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Samsung Galaxy S20+ 5G SM-G986B Flash File (Stock Firmware)

Samsung Galaxy S20+ 5G SM-G986B Flash Files:

Flash File Name: SM-G986B_G986BXXU7DUE1_11.0_file.zip
Build Number: G986BXXU7DUE1
Security Patch: May 2021
Model:
SM-G986B
Android Version: 11.0
Download
Flash File Name: SM-G986B_G986BXXU7DUDB_11.0_file.zip
Build Number: G986BXXU7DUDB
Security Patch: April 2021
Model:
SM-G986B
Android Version: 11.0
Download
Flash File Name: SM-G986B_G986BXXU7DUC7_11.0_file.zip
Build Number: G986BXXU7DUC7
Security Patch: March 2021
Model:
SM-G986B
Android Version: 11.0
Download
Flash File Name: SM-G986B_G986BXXU5BTJ3_11.0_file.zip
Build Number: G986BXXS6DUBA
Security Patch: March 2021
Model:
SM-G986B
Android Version: 11.0
Download
Flash File Name: SM-G986B_G986BXXU5BTJ3_10.0_file.zip
Build Number: G986BXXU5BTJ3
Security Patch: October 2020
Model:
SM-G986B | Region: Europe
Android Version: 10.0
Download
Flash File Name: SM-G986B_G986BXXU5BTJ1_10.0_file.zip
Build Number: G986BXXU5BTJ1
Security Patch: October 2020
Model:
SM-G986B | Region: Netherland
Android Version: 10.0
Download
Flash File Name: SM-G986B_G986BXXU4BTIB_10.0_File.zip
Build Number: G986BXXU4BTIB
Security Patch: September 2020
Model:
SM-G986B | Region: Europe and Middle East/Africa
Android Version: 10.0
Download
Flash File Name: SM-G986B_G986BXXS5BTIJ_10.0_File.zip
Build Number: G986BXXS5BTIJ
Security Patch: October 2020
Model:
SM-G986B | Region: Europe
Android Version: 10.0
Download

Steps to Flash Stock ROM File on Galaxy S20+ 5G SM-G986B

Before we get straight to steps to Install Stock Firmware on your Samsung Galaxy S20+ 5G, let us take a look at the pre-requirements at first.

Advertisements

Pre-Requirements: 

  • This Guide is for Samsung Galaxy S20+ 5G SM-G986B
  • You need a Windows PC/Laptop and a USB cable to flash a firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy S20+ 5G.

Disclaimer:

We’re at GetDroidTips won’t be responsible for any kind of damage/error occurs to your handset while/after following this guide or flashing any file. Proceed at your own risk.
  1. Download the Samsung SM-G986B flash file
  2. Extract the contents of the firmware flash file zip.
  3. Launch the ODIN application
  4. Load the firmware files in their appropriate section
  5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  6. Notice that the CO port will light up on Odin once you connect your phone.
  7. Click the Start button to install the firmware on your Samsung device.
  8. That’s it! You will see a PASS message once the installation is complete.
Follow Complete Guidelines

Check out our full depth video guide as well.

Video Tutorial To Install Firmware

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.