How to Unbrick OnePlus 7T Pro: Restore back to Stock ROM from Dead

If you are having a dead or bricked OnePlus 7T Pro and are looking for a way to fix it then, you are at the right place as in this post, we will guide you on the stepwise procedure on how to unbrick OnePlus 7T Pro and restore it back to stock ROM from dead. You might have bricked your device while flashing a custom ROM or while rooting your device. A bricked phone is of no use, but with this guide, you can revive your bricked and damaged OnePlus 7T Pro.

In fact, in this post we will give you a guide for the International, Indian and European firmware along with the download links for the MSM or unbrick tool. However, if you do not follow this guide correctly, you might permanently damage your phone so, it is advised to follow the steps carefully as mentioned. So, without any further ado, let us get straight into the article itself:

How to Unbrick OnePlus 7T Pro: Restore back to Stock ROM from Dead

OnePlus 7T Pro Specifications: Overview

The OnePlus 7T Pro comes with a 6.67-inches Quad HD+ Fluid AMOLED 90Hz display with a resolution of 1440×3120 pixels. The display also supports HDR10+ and packs with Corning Gorilla Glass 6 protection. It runs on OxygenOS 10.0 over Android 10.0 out-of-the-box. The handset is powered by the octa-core flagship Snapdragon 855 Plus chip, coupled with Adreno 640 GPU.

The OnePlus 7T Pro has two variants like one standard 8GB/12GB of RAM, 256GB internal storage option. While the Mclaren Edition 7T Pro comes with single 12GB RAM, 256GB storage. The triple rear camera of 48MP wide, an 8MP telephoto, and 16MP ultrawide lens are available on this device. A 16MP pop-up selfie camera available with an f/2.0 aperture lens.

In terms of the connectivity options, it has Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, A-GPS, GLONASS, NFC, USB Type-C port, etc. It has a 4,085mAh battery with 30W OnePlus Warp charging technology. While all the major sensors are available like an in-display fingerprint sensor, an accelerometer, gyroscope, proximity, and compass sensor.

How to Unbrick OnePlus 7T Pro: Restore back to Stock ROM from Dead

Download MSM Tool

Steps to unbrick OnePlus 7T Pro


Before we begin with this guide, I would strongly recommend you to follow the steps mentioned in this post very carefully to avoid permanent damage of your device. If anything goes wrong the author or GetDroidTips are not responsible for it.

Below are the steps to unbrick the OnePlus 7T Pro. Moreover, this guide should work with HD1910 (Chinese variant), HD1911 (Indian variant), HD1913 (EU variant) and HD 1917 (North America) models.

  1. Firstly, you need to turn off your phone.
  2. Press the Volume Up and Down keys to enter into the Qualcomm EDL mode.
  3. Open and launch the MSM Tool.
  4. Now click on Enum to make sure that your device is connected.
  5. Press Start.
  6. You need to need for the process to complete.
  7. That’s it!

So, there you have it from my side in this post and were able to unbrick your OnePlus 7T Pro. Note that this guide is only applicable for OnePlus 7T Pro and should not be done on other devices. You can try this method at your own risk. Let us know in the comments below if you come across any issues while following the above-mentioned methods. Until the next post…Cheers!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.