LG K51 LMK500MM Stock Firmware Flash File | How to Install

In this article, we have shared the instruction and download link to install the official firmware file on LG K51 LMK500MM. To flash the firmware file, you need to install the LG Flash Tool (Also known as LG UP Tool) on your computer.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software related issues such as hard brick, soft brick, WiFi or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

LG K51

The Advantage of Stock Firmware

  • Flash Stock To Unbrick your LG K51
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade LG K51
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on LG K51
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Download Firmware Files

Software details Download Link
Flash File Name: K500MM10f_00_MPCS_US_OP_0610
Software version: K500MM10f
Size: 2.5 GB
Download File

Steps to Install LG K51 Stock Firmware:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requisite:

  • Remember: Supported for LG K51 LMK500MM
  • Charge your phone: Before you proceed with the below information, you are recommended to ensure that your LG K51 LMK500MM is at least 50% charged.
  • Laptop or PC: To carry out this installation, you need a PC or Laptop.
  • Take Device Backup: The very first thing to pay attention to is taking the device backup. You might not be able to take the backup of phone data, however, if you have inserted a memory card in your device, remove it at least to save it.
  • LG Flash Tool and LG UP tool: Download LG Flash Tool and LG UP Software.
  • Install Latest Driver: Install the Latest LG USB Drivers. [For All Android USB Drivers]
  • Download: Download the below given required files on your PC.

[su_note note_color=”#fbf5c8″ text_color=”#000000″]

Disclaimer: We at Getdroidtips.com cannot be held responsible if anything goes wrong. Take your own risk!

[/su_note]

Instructions to Install on LG K51:

  1. First of all, Download all the files like KDZ Firmware, LG Drivers, and also LG UP latest version.
  2. Install LG UP Exe file on your computer.
    Install LG V20 Stock Firmware
  3. Now make sure to install the drivers if you are phone does not detect on your PC/Laptop.
  4. Now turn your phone off and then Hold the Volume UP key for few seconds.
  5. While holding Volume Up key connect your phone to the PC using a USB Cable (Don’t leave volume key while connecting)
  6. Release the Volume UP key as soon as the phone goes into Download Mode.
  7. Open LG UP software on your PC and Select Upgrade
  8. Now in the Select Path, Select your KDZ file from your downloaded folder.
    Install LG V20 Stock Firmware
  9. Once it is loaded, Click the start button down below and wait for the installation to complete.
    Install LG V20 Stock Firmware
  10. Once it is completed, your phone will reboot automatically. Booting may take time. So wait patiently to complete the first booting process.

So, that’s it. You have successfully installed stock ROM on LG K51.

I hope you installed the Stock ROM on LG K51 successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.