Fix: No Man’s Sky Screen Tearing on PS4, PS5, or Xbox One, Series X/S

No Man’s Sky is another survival game based on exploration that was developed & published by Hello Games in August 2016. It’s available for the PlayStation 4, Xbox One, and Microsoft Windows platforms. This action-adventure survival game offers four modes: exploration, survival, combat, and trading. However, it seems that just like other video games, the No Man’s Sky title has also a Screen Tearing issue on PS4, PS5, or Xbox Consoles which is irritating.

Now, if you’re also facing the same issue then make sure to follow this troubleshooting guide completely to fix it. Screen Flickering or Screen Tearing becomes one of the most common issues among players no matter whether they’re using a PC or a console. In this scenario, the specific game seems to have some graphical glitches or the visuals start shimmering quite occasionally which basically affects the gameplay experience and nothing else.

Fix: No Man’s Sky Screen Tearing on PS4 and PS5

If you’re using the PS4 or PS5 console and facing the screen flickering issue quite often then make sure to follow the methods below one by one until the problem gets fixed.

1. Use Another Graphics Mode

It’s expected to encounter frame drops in some games occasionally even if you’re using the PS4/PS5 console. Make sure to try using another graphics mode in the game settings menu to cross-check whether the higher graphics settings are conflicting with the system performance or not. Sometimes changing the graphics mode or reducing the graphics quality up to some extent (depending on your need), may fix such an issue.

5. Power Cycle your PS4/PS5

It seems that sometimes any system glitch or cache issue can cause errors, crashes, lags, screen flickering, etc. By power cycling your console, you can simply clear the temporary cache or glitch to improve the performance.

First, shut down your console completely.
Next, remove the power cable from the console.
Wait for around 30 seconds and plug back the cable in.
Finally, turn on the PS4/PS5 console and check for the issue again.

6. Keep PS4/PS5 in a well-ventilated area

In some scenarios, your PS4/PS5 console may trigger several issues with the system performance or game lags due to overheating. Sometimes the lack of proper air ventilation in the room may cause hardware stress that directly affects gameplay or gaming performance. So, you should keep your PS4/PS5 console in a well-ventilated place to check if there is an overheating issue or not.

The proper airflow and the cooler place or temperature inside the room might gonna help the PS4/PS5 console to work better. Keeping the console in a congested area or directly under sunlight may trouble a lot.

7. Check your TV or Monitor

Another possible reason behind the No Man’s Sky game lagging on the PS4/PS5 console is that your TV or monitor might have some issues with the screen refresh rate. Maybe there is a temporary glitch or the refresh rate issue appearing on the PS4/PS5 console that may trigger some issues.

8. Check the HDMI port

It’s also recommended to check the HDMI port of both the console and display device properly because a misalignment or even the dust particles can easily cause connectivity issues whatsoever. Try gently removing the HDMI cable and then blow some air in force to clear dirt/dust from the HDMI port.

9. Check the Free Hard Drive Space

Sometimes having low storage space on the hard drive can also trigger application launching issues apart from glitches, slow loading, lags, graphical issues, etc. You should always check for the free hard drive storage space before getting to any other conclusion. If the free storage space is too low then make sure to uninstall unnecessary games or other applications from your PlayStation console and check for the screen tearing issue again.

10. Eject the Game Disc and Gently Clean It

If in case, you’re using the disc edition of the PlayStation console then keeping and using the physical discs are quite a tough job because any kind of scratches or physical damage or even dust particles can easily ruin the disc and your gaming experience too. So, it’s suggested to simply eject the game disc and gently clean it using a microfiber cloth to remove smudges and dirt then try inserting the disc again to check for the issue.

11. Try Playing Another Game on PS4/PS5

Sometimes PlayStation games may not run properly which is a bit of a letdown. Make sure to play another game on the PS4/PS5 console to check for the issue or wait for some time to try again.

12. Clear No Man’s Sky Game Data

It seems that clearing out the game saved data on the console may also fix multiple issues with the game launching or gameplay. You can try it out:

Go to Settings > Select Application Saved Data Management.
Choose either System Storage or Online Storage or USB Storage > Select Delete.
Select the No Man’s Sky game > Checkmark the files that you want to delete or just Select All.
Finally, select Delete > Select OK to confirm the task.
Once done, reboot your console to check for the No Man’s Sky screen flickering issue on the PS4/PS5 console.

13. Rebuild Database

Rebuilding the database on your PlayStation console can quickly resolve the potential issues or errors. To do so:

Switch off your console completely. Unplug the power cable from the console and wait for around 2-3 minutes.
Now, plug in the power cable, and turn it on to clear the Cached Data automatically from the system.

Check whether this issue has been fixed with the No Man’s Sky Stay Human game or not. If not, follow the next steps below.

Now, press and hold the Power button on the PlayStation console until you hear 2 beeps. [The second beep will sound after seven seconds]
The console will boot in the Safe Mode > Connect the controller to the USB with the console and press the PS Button on the controller.
Next, you’ll get an option called Rebuild Database.
Select Rebuild Database and confirm the task.
It may take some time depending on the hard drive data size. Have some patience.
Once done, just reboot the system normally.

14. Hard Reset your Console

In most cases, performing the hard reset of your console can fix system glitches or cache data issues from the game itself. To do so:

Switch off your PlayStation 4 or PlayStation 5 console first.
Once the console is turned off, press and hold the Power button on the console until you hear two beep sounds within a couple of seconds.
Here you’ll see two reset options to choose from.
Select the necessary option to reset your PlayStation console.
Wait for the process to complete and then make sure to sign in to the PlayStation account.
Finally, install the No Man’s Sky game, and try running it.

15. Don’t Put in Rest Mode

As a bonus method make sure not to put your console in the rest mode because it may cause the system to have glitches or fully goes into the rest mode. So, during the gameplay sessions, don’t put in the rest mode. To do so:

Go to the PS5 Settings menu > Open the Power Saving tab.
Select Set Time Until PS4/PS5 Enter Rest Mode.
Set to Don’t Put in Rest Mode > Restart the console to apply changes.

Fix: No Man’s Sky Screen Tearing on Xbox Consoles

If you’re using the Xbox gaming console and facing the screen tearing issue with the No Man’s Sky game then make sure to follow the methods below.

1. Check System Updates

We’ll highly recommend you check for system updates on the Xbox console before jumping into any other getting into any other workarounds because an outdated system version can trigger screen-related issues whatsoever. To do so:

Press the Home button on the Xbox console to open the Dashboard menu.
Now, select Settings from the bottom of the menu > Select All Settings.
Choose to System > Select Updates.
Select Update Console (if available) > Follow the on-screen prompts to complete the update process.
Once done, make sure to restart the console to apply changes.

2. Update No Man’s Sky

You should also update the game version on your console to ensure there is no issue with the game files. An outdated or corrupted game can easily trigger multiple issues whatsoever. To do so:

Go to the My Games and Apps section of your Dashboard menu.
Select Manage > Go to Updates.
If your No Man’s Sky game has any available updates, you can find them easily.
Make sure to select the update process and press the A button on the controller to start it.

Note: It’s worth recommending to go to the Settings page > Choose to Systems > Select Updates to make your game update automatically whenever the console is connected to the internet.

3. Power Cycle your Xbox Console

It’s worth mentioning to perform a power cycle method on your Xbox console to ensure there is no issue with the device firmware or glitch. A normal reboot might not work in most cases and requires a power cycle process to clear out temporary glitches or cache data issues. To do this:

Power Off the Xbox console > Unplug the power cable from the console and power source.
Now, wait for around 30 seconds, and then plug back the power cable in.
Make sure to turn on the Xbox console and check whether the screen flickering issue has been fixed or not.

4. Reinstall the Game

You should also try uninstalling and reinstalling the No Man’s Sky game on your Xbox console. Once done, make sure to reinstall it on the Xbox console to avoid game-related issues. To do this:

Press the Xbox button on the controller to open the Guide menu.
Select My Games and Apps > Hit See all > Choose to Games.
Then select the Ready to install tab > Select Queue.
Select the No Man’s Sky game that you’re trying to reinstall.
Now, press the Menu button on your controller.
Select Manage game & add-ons or Manage app.
Choose No Man’s Sky > Select Uninstall all.
Make sure to select Uninstall all to confirm the task.
Wait for the uninstallation process to complete.
Reboot the system to apply changes.
Then press the Xbox button on the controller to open the Guide menu again.
Hit My Games and Apps > Select See all > Go to Games.
Select the Ready to install tab > Hit Install for No Man’s Sky.
Wait for the installation process and then restart the console.

5. Reset the Console

If the above methods didn’t work for you then make sure to follow the steps below to simply reset the console manually. By doing so, you can easily clear out system glitches or cache data issues from your console whatsoever. To do so:

Press the Xbox button on the controller to open the Guide menu.
Select Profile & system > Go to Settings > Select System.
Go to Console info > Select Reset console.
You’ll get a prompt like Reset your console?
Here you should select Reset and remove everything. [This will delete all user data including accounts, saved games, settings, all installed apps & games, etc]
- Although you can choose to Reset and keep my games & apps, it may not gonna resolve the issue in most cases.
After you select the option, your Xbox console starts deleting and resetting the system to the factory default settings.
Wait for the process to get completed then reboot the console.

That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.