Download Xiaomi Poco M4 Pro 4G/5G Android 14 (HyperOS / MIUI 15) Update

Xiaomi Poco M4 Pro came out of the box with Android 11 in 2021 and later received Android 12 and Android 13. If you want to try the Android 14 update, you’ve come to the right place. Today Xiaomi rolled out the HyperOS based on Android 14 for the Poco M4 Pro 4G/5G. Follow this guide to install it.

HyperOS is a successor to MIUI that will offer better performance. Now, if you’re a Xiaomi Poco M4 Pro 4G/5G series user and want to get an early taste of HyperOS based on Android 14 OS, check out this full guide to downloading and Installing HyperOS ROM on Poco M4 Pro 4G/5G.

As per reports, Xiaomi will start rolling out HyperOS in India and other countries from Q1 2024 onwards. At the time of writing this article, the EU and Chinese variants of HyperOS were already available for a bunch of models, respectively. Xiaomi Poco M4 Pro 4G/5G firmware (codenamed: fleur/evergreen) links have been given below with the global recovery and fastboot ROM release that you can check. Here, we’ve shared steps to flash the HyperOS firmware on your Xiaomi Poco M4 Pro 4G/5G via fastboot and recovery methods.

Download Xiaomi Poco M4 Pro 4G/5G Android 14 (HyperOS / MIUI 15) Update

Xiaomi Poco M4 Pro 5G Device Overview:

Poco M4 Pro features a 6.43-inch FHD+ AMOLED panel with a 90Hz refresh rate. It has a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. The screen has a peak brightness of 1000 nits and it is protected by Corning Gorilla Glass 3. Under the hood, we have the MediaTek Helio G96 that is built on a 12nm manufacturing process. It is an octa-core processor with two Cortex-A76 cores clocked at 2.05 GHz and six Cortex-A55 cores clocked at 2.0 GHz. For handling the graphics-intensive tasks, we have the Mali-G57 MC2.

In terms of optics, we get a triple camera setup at the rear and a single camera at the front. The triple camera consists of a 64 MP primary sensor paired with an f/1.8 lens, an 8 MP ultrawide sensor paired with an f/2.2 lens, and a 2 MP macro sensor paired with an f/2.4 lens. At the front, we have a 16MP sensor paired with an f/2.5 lens. Both the front and rear camera setup is limited to 1080p video recording.

There are two storage variants of this smartphone: 128GB 6GB RAM and 256GB 8GB RAM. there is a dedicated microSD card slot available for storage expansion. in terms of communications, we have Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, NFC, Infrared port, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, gyro, proximity, and compass. Powering it all is a 5000 mAh battery that supports 33W fast charging. The smartphone is available in three color options: Power Black, Cool Blue, and Poco Yellow

Flash HyperOS on Poco M4 Pro 4G/5G using Fastboot

The all-new HyperOS is based on the Android 14 operating system out of the box and includes plenty of goodies, improved performance, enhanced security with hardware-level integration, dynamic visuals, and more. It’s meant to be an optimized version of MIUI without unnecessary bloatware and bugs that have ruined the user experience in the last couple of years. But not anymore!

It’s recommended to use any methods like TWRP Recovery or Fastboot to flash the firmware. Do keep in mind that both methods will wipe off all the data from your device. So, make sure to take a complete data backup from the device before getting into the steps.

Warning: GetDroidTips won’t be held responsible for any issue or error that might happen while/after following the steps below. You should know what you’re doing. So, do it at your own risk.


  • Make sure your handset is sufficiently charged.
  • You will need a computer and a stock USB data cable.
  • Take a full backup of the data from your phone.
  • Install ADB and Fastboot Tools on your computer.

Step 1: Enable USB Debugging and OEM Unlocking

First, you’ll have to turn on USB Debugging and OEM Unlocking on your Xiaomi device by following the steps below. By doing so, your device will be recognized by the computer and you can proceed further in the Fastboot method. To do so:

  • Open Settings on your Poco M4 Pro 4G/5G.
  • Go to About Phone > Tap on the MIUI version 7 times.
  • It’ll enable the Developer Options menu on the handset.


  • Now, go back to Settings menu > Search for Developer Options and open it.
  • Enable the USB Debugging option.
  • Turn On the OEM Unlock toggle > Hit Enable to confirm.

Step 2: Unlock Bootloader

It’s highly important to unlock the device bootloader as stock ROMs do come with a locked bootloader to ensure data privacy. As this is considered to be an unofficial ROM (custom ROM), you will need to unlock the device’s bootloader. Once unlocked, the system and data on your handset will become less secure & will be prone to malware attacks. Additionally, some internal features might not work properly such as Find device, added-value services, etc. Do remember that unlocking the bootloader can also void the manufacturer’s warranty.

  • Download the Mi Unlock Tool on your computer.
  • Extract the zip file and run the application.
  • Now, sign in with your Mi Account. [You can also create a new one]
  • Switch Off your phone manually > Long-press the Volume Down+Power buttons for a while.
  • This will allow the handset to enter Fastboot mode.
  • Next, connect your smartphone to the PC via a USB cable.
  • Once the Mi Unlock Tool detects your connected handset, it’ll notify you.
  • Click on Unlock and wait for it to complete.

  • A confirmation pop-up will appear > Click on the Unlock anyway button.

  • Your device data and settings will be wiped off.
  • The unlocking process will take a while to complete.
  • Once done, you’ll get a message that says “Unlocked successfully”.

  • Finally, click on the Reboot phone button to restart your device.
  • Disconnect the USB cable from the handset.

Step 3: Download Xiaomi HyperOS ROM

Next, you can select and download the latest Xiaomi HyperOS ROM for your respective device model using the links below, such as Xiaomi Poco M4 Pro 4G/5G. The HyperOS recovery and fastboot ROM links are mentioned below, where you can either go with the recovery or fastboot ROM version to install.

Xiaomi Poco M4 Pro 4G HyperOS firmware Android 14:

Software Version and Downloads Changelog
Global Stable ROM:

  • System
    • Updated Android Security Patch to February 2024. Increased system security.
  • Vibrant aesthetics
    • Global aesthetics draw inspiration from life itself and change the way your device looks and feels
    • New animation language makes interactions with your device wholesome and intuitive
    • Natural colors bring vibrancy and vitality to every corner of your device
    • Our all-new system font supports multiple writing systems
    • Redesigned Weather app not only gives you important information, but also shows you how it feels outside
    • Notifications are focused on important information, presenting it to you in the most efficient way
    • New Home screen icons refresh familiar items with new shapes and colors
    • Multitasking is now even more straightforward and convenient with an upgraded multi-window interface

Xiaomi Poco M4 Pro 5G HyperOS firmware Android 14:

Coming Soon…

Step 4: Boot to Fastboot Mode

You’ll have to boot your Xiaomi device to the Fastboot Mode to proceed with the firmware flashing. Check out the following steps.

  • Connect your device to the PC via a USB cable.
  • Make sure the USB Debugging option is already enabled.
  • Go to the platform-tools installation folder on your PC.
  • Type in CMD in the address bar and hit Enter to launch Command Prompt.

  • Next, execute the command below to boot your device to Fastboot Mode:
adb reboot bootloader
  • Once done, run the following command to check the fastboot connectivity with a Device ID:
fastboot devices

  • In case, you’re not getting the device ID then install the Android USB Driver on the PC and try again.

Step 5: Flash HyperOS ROM via Fastboot

  • Ensure you’ve already downloaded the ROM file on your computer.
  • Now, double-click on the windows_fastboot_first_install_with_data_format.bat file to launch it.
  • The firmware flashing process will start now.
  • Please wait for it to complete. [Do not touch the device or data cable during the process]
  • Once done, your Poco M4 Pro 4G/5G will automatically boot to HyperOS.
  • The first boot to the system might also take some time. So, have some patience.
  • Go through the initial setup process to get into the home screen.
  • You’re done. Enjoy!

Flash HyperOS on Poco M4 Pro 4G/5G using Recovery

The main firmware flashing process will be different from the recovery method, but the initial requirements and steps will be almost the same as the fastboot method. That means even if you’re using the recovery method to install the HyperOS ROM on your Xiaomi device, you must follow the steps below.

Step 1: Requirements

  • Install Android SDK Platform Tools on the PC.
  • Charge the device more than 50%.
  • Take a full data backup from the handset.
  • You’ll require a computer and a stock USB data cable.

Step 2: Allow USB Debugging and OEM Unlocking

  • Enable USB Debugging and OEM Unlocking using the above steps.

Step 3: Unlock Bootloader

  • Unlock the device’s bootloader via the Mi Unlock Tool using the above steps.

Step 4: Download HyperOS ROM

  • Download the HyperOS release firmware file on the PC. (links above)
  • Transfer the ROM file to the device storage.

Step 5: Boot to Fastboot Mode

  • Now, boot your Poco M4 Pro 4G/5G to Fastboot Mode. (steps above)
  • Follow the ROM flashing steps below once your handset is connected to fastboot.

Step 6: Flash HyperOS ROM via Recovery

Next, you’ll need to install a custom recovery like TWRP for your model compatible with the handset. This TWRP recovery will help you flash the Xiaomi HyperOS ROM quite easily. You can also use any other custom recovery tools like OrangeFox (if you want).

  • Visit the TWRP official site and download the TWRP build corresponding to your device.
    • If you can’t find the latest TWRP version, try visiting the XDA Forum to check for the same.
  • Now, use the fastboot method to flash TWRP (.img or .zip) on the handset.
  • Boot into the TWRP recovery menu > Tap on the Wipe button.

Xiaomi Firmware How to Install Fastboot ROM or Recovery ROM

  • Choose Factory reset > Slide the Swipe to Factory Reset option.

  • Once the factory reset is completed, go back to the main menu.
  • Here you’ll need to tap on the Install button.

Xiaomi Firmware How to Install Fastboot ROM or Recovery ROM

  • Head over to the downloaded firmware directory of your device storage.
  • Tap and select the Recovery ROM zip file.

  • Slide the Swipe to confirm Flash option.
  • Wait for it to complete and then tap on the Reboot button.

Xiaomi Firmware How to Install Fastboot ROM or Recovery ROM

  • Now, your device will reboot automatically to HyperOS.
  • The first time booting to the system might take a couple of minutes.
  • Go through the initial setup process to get into the home screen.
  • You’re good to go.

In conclusion, this guide has shown you the steps to successfully install HyperOS ROM on your Poco M4 Pro 4G/5G. If you have any further questions or encounter any issues during the installation process, feel free to leave a comment below for assistance.


    1. Your comments is useless if you don’t know anything poco m4 pro 5g takes only 60 minutes for 1 to 100 charge your phone charging slow maybe you aren’t using original charger use always original charger given by the brand ok

  1. After updating my phone to MIUI (TGBINXM), my phone actually stopped receiving 5G internet in my locality, if I am moving towards town then i am able to use 5G. Am I only user to face this problem. Please reply!

  2. Sorry sir my poco m4 pro 5g original charger not support torbo chargin
    Is my phone slow charing please🙏🙏🙏

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.