Xiaomi Poco X6 Neo 5G Firmware Flash File Collections

Xiaomi Poco X6 Neo 5G is a new addition to the X series lineup of smartphones. It boasts a 6.67-inch display with a 120Hz refresh rate. The phone is powered by a MediaTek Dimensity 6080 SoC and is available in two RAM and storage configurations. It comes with a dual rear camera setup featuring a 108-megapixel primary sensor and houses a 5,000mAh battery that supports 33W fast charging. Interestingly, the Poco X6 Neo 5G appears to be a rebranded version of the Redmi Note 13R Pro.

On this page, we will share all the latest POCO X6 Neo 5G (codenamed goldIN) firmware flash files. To flash the firmware file, you need the Xiaomi Mi Flash Tool, which works on Windows, Mac, and Linux. You can follow this guide to flash the firmware stock ROM file on POCO X6 Neo 5G.

Xiaomi POCO X6 Neo 5G Specs Overview

The Poco X6 Neo 5G device uses the Android 13-based MIUI 14 operating system, which features a 6.67-inch AMOLED display with a 120Hz refresh rate. It is powered by a 6nm MediaTek Dimensity 6080 SoC with up to 12GB of LPDDR4X RAM, a Mali G57 MC2 GPU, and up to 256GB of UFS 2.2 onboard storage. The virtual RAM expansion feature allows for the expansion of the onboard memory up to 24GB. It also includes graphite sheets for thermal management during gaming hours.

In terms of cameras, the Poco X6 Neo 5G has a dual rear camera system, including a 108-megapixel Samsung ISOCELL HM6 primary camera with 3x sensor zoom and a 2-megapixel shooter. For selfies, it carries a 16-megapixel front-facing camera.

Connectivity options on the Poco X6 Neo 5G include 5G, Bluetooth 5.3, Glonass, Galileo, NFC, USB Type-C port, 3.5mm audio jack, Wi-Fi 802.11a/b/g/n/ac, and GPS/AGPS. Onboard sensors include an accelerometer, ambient light sensor, e-compass, gyroscope, IR blaster, and proximity sensor. Furthermore, the smartphone has a side-mounted fingerprint sensor and supports an AI-backed face unlock feature for authentication. The handset features a single speaker with support for Dolby Atmos.

Poco has packed a 5,000mAh battery on the Poco X6 Neo 5G with 33W fast charging support. It has an IP54 rating for dust and splash resistance, measures 161.11×74.95×7.69mm, and weighs 175 grams.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Poco F3 Stock ROM flash file on your computer.

• If your device is dead, you can unbrick it using the Stock ROM file
• You can fix or repair the IMEI on your device using DB files from Stock ROM
• Remove any malware or Adware from Poco F3
• You can fix the boot loop issue on Poco F3
• Fix Unfortunately, the app has stopped errors on Poco F3
• Fix Network related issue
• Patch Boot image to Root using Magisk
• You can unroot Poco F3
• To Reset or Remove FRP on your device:
• Restore Poco F3 to Factory State

How to install Stock Firmware on POCO X6 Neo 5G

Before installing, follow the prerequisites and install the necessary drivers and tools on your PC.

Pre-Requisites:

• This Flash File is for POCO X6 Neo 5G.
• You should have a working Windows PC/Laptop
• Download and Install the latest Xiaomi USB Driver for Windows and MAC.
• Download and Install the Xiaomi Mi Flash tool on your PC (Fastboot Method)
• Charge your phone to at least 50% before upgrading your phone.
• Take a complete backup of your phone data

Indian Firmware Flash File:

Instructions to Flash The ROM:

To install MIUI Flash files on your POCO X6 Neo 5G, we have given two methods: either you can follow the recovery method or you can follow the Fastboot method. A detailed guide on both methods is given below:

You can check out our full-depth tutorial video as well:

I hope you installed the Stock ROM on POCO X6 Neo 5G (alioth) successfully, Now please rate this website with your comment. We always welcome feedback and improvements.