Download Samsung A73 5G SM-A736B Firmware Flash File (Binary 1 U1)

In this tutorial, we will guide you on how to install the Samsung SM-A736B (Galaxy A73 5G) Binary 1 U1 flash file using the Samsung flash tool (also known as the ODIN flash tool). On this page, you will find the official stock firmware file for the Samsung Galaxy A73 5G SM-A736B, drivers, and flash tool.

By flashing the Stock ROM file, you can always fix the device software issues such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, etc.

Samsung Galaxy A73 5G Device Overview:

The Samsung Galaxy A73 5G features a 6.7-inch Super AMOLED Plus panel with a 120 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2400 pixels. We get Corning Gorilla Glass 5 at the front and the back for protection. Under the hood, we get the Qualcomm Snapdragon 778 5G built on a 6 nm manufacturing process. It is an octa-core processor with four Kryo 670 cores clocked at 2.4 GHz and four Kryo 670 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Adreno 642L.

In terms of optics, we get a quad-camera setup at the rear and a single selfie camera at the front. The quad camera setup consists of an 108 MP primary sensor paired with an f/1.8 lens, a 12 MP ultrawide sensor paired with an f/2.2 lens, a 5 MP macro sensor paired with an f/2.4 lens, and a 5 MP depth sensor paired with an f/2.4 lens. The primary sensor has OIS(Optical Image Stabilisation). Coming to the front, we get a 32 MP sensor paired with an f/2.2 lens. Both the front and the rear can capture 4K videos at 30 fps.

This smartphone comes in three storage options: 128GB internal storage + 6GB RAM, 128GB internal storage + 8GB RAM, and 256GB internal storage + 8GB RAM. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.0, GPS, NFC, and USB Type-C 2.0. And for sensors, we get an under-display optical fingerprint sensor, accelerometer, gyro, proximity, and compass. Powering it all is a 5000 mAh battery that supports 25W fast charging. The smartphone is available three colour options: Gray, Mint, and White.

Samsung Galaxy A73 5G SM-A736B U1 Firmware Flash Files:

Steps to Install Firmware File on Samsung A73 5G SM-A736B

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy A73 5G, let us look at the pre-requirements first.

Pre-Requirements: 

• This Guide is for Samsung Galaxy A73 5G SM-A736B
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s look at the steps to flash Stock ROM on Samsung Galaxy A73 5G.

Installation Guide

1. Download the Samsung SM-A736B firmware flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines

Check out our full-depth video guide as well.

We hope that this guide will be helpful to you. If in case you’re facing any issues, feel free to ask in the comments below.