Download Samsung Galaxy M52 5G SM-M526B Firmware Flash File (Binary 1 U1)

Samsung Galaxy M52 5G launched in India as a premium mid-range 5G phone comes with triple rear cameras and a 120Hz Super AMOLED Plus display. The device is powered by Qualcomm Snapdragon 778G SoC, 7,000mAh battery, and packs up to 8GB + 128GB.

In this tutorial, we will guide you on how to install the Samsung SM-M526B (Galaxy M52 5G) Binary 1 U1 flash file using the Samsung flash tool (also known as the ODIN flash tool). On this page, you will find the official stock firmware file for the Samsung Galaxy M52 5G SM-M526B, drivers, and flash tool.

By flashing the Stock ROM file, you can always fix the device software issue such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, and many more.

Samsung Galaxy M52 5G Device Overview:

Samsung M52 5G features a 6.7-inch Super AMOLED Plus display with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. It is a high refresh rate panel with a 120Hz refresh rate. Under the hood, we have the Qualcomm Snapdragon 778G 5G built on a 6nm manufacturing process. It is an octa-core processor with four Kryo 670 cores clocked at 2.4 GHz and four Kryo 670 cores clocked at 1.8GHz. For handling the graphics-intensive tasks, we have the Adreno 642L.

In terms of optics, we have a triple-camera setup at the rear with a 64MP primary sensor paired with an f/1.8 lens, a 12MP ultrawide sensor paired with an f/2.2 lens, and a 5MP macro sensor paired with an f/2.4 lens. At the front, we have a 32MP selfie sensor with an f/2.2 lens. The front sensor can capture only 1080p videos, while the rear setup can record 4K videos.

The smartphone comes with Android 11 out of the box with OneUI 3.1 skin on top. There are two storage variants of this smartphone with 6GB RAM + 128GB internal storage and 8GB RAM + 128GB internal storage. There is also a MicroSD slot for storage expansion. In terms of communications, we have Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.0, GPS, NFC, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint scanner, accelerometer, gyro, proximity, and compass. For powering the device, we have a 5000 mAh battery that supports 25W fast charging. The smartphone is available in three color options: Icy Blue, Blazing Black, and White.

Samsung Galaxy M52 5G SM-M526B U1 Firmware Flash Files:

Steps to Install Firmware File on Samsung Tab A7 Lite SM-M526B

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy M52 5G, let us take a look at the pre-requirements first.

Pre-Requirements: 

• This Guide is for Samsung Galaxy M52 5G SM-M526B
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy M52 5G.

Installation Guide

1. Download the Samsung SM-M526B firmware flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Check out our full-depth video guide as well.

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.