Looking to put a firmware file on your Itel it1409? You’ve found the right spot. Nowadays, it’s common to customize smartphones, but doing so can cause problems such as a bricked device or endless boot loops. When this happens, flashing the stock firmware is the answer. For the Itel it1409, we offer the most recent stock firmware, a flash tool, and a thorough guide to assist you through installation. Our instructions are straightforward and easy to understand, so putting the stock ROM on your Itel it1409 should be a breeze.
Page Contents
How do you install stock ROM on Itel it1409?
To install a stock ROM on your device, you need to download the corresponding stock ROM and the USB drivers. You’ll also need a flash tool specifically for your device, such as the Spreadtrum Flash Tool for the Itel it1409, which runs on the Spreadtrum chipset.
You’ll need some other tools, which we’ll list below, in addition to the flash tool. Make sure to download and install them as instructed. Before you start the installation, let’s understand the importance of a stock ROM.
Why Stock ROM is important.?
A stock ROM is an OS that the device runs when it’s unboxed. It’s the pre-built operating system. So, by flashing the firmware, you would literally restore the device to its original working state.
- A stock ROM can fix the device boot loop issue
- If your phone is bricked, then you can unbrick it by flashing the device with the latest stock ROM
- You can upgrade/downgrade your device’s OS via flashing a stock ROM only.
- it is important during unrooting the device and going back to stock
Firmware Details
- Device Name: Itel it1409
- ROM Type: Firmware
- Gapps File: Included
- Tool Supported: SPD Flash Tool
- Chipset: Spreadtrum SoC
- Android Version: Android 6.0
Firmware Installation Guide for Itel it1409
As mentioned before, here is the list of flash tools and other software that are important for successfully installing stock ROM on Itel it1409.
Pre-Requisites:
- The stock ROM provided in this guide is exclusively for Itel it1409. Please do not use it on any other device.
- Before installing the stock ROM, charge your device’s battery up to 50%.
- A laptop/PC
- Don’t forget to take a backup of your device data. Backup without root | Nandroid Backup via TWRP
- Make sure to download firmware, drivers, and tools to flash the firmware on your Itel it1409.
- VCOM Driver: Download Spreadtrum USB Driver
- Flash tool: Download SPD Flash tool
- Drivers: Download Android USB Drivers
Download Flash Files:
Flash File Name: Itel_IT1409_C219F_IN_20160908.zip File Size: 795 MB OS: Android 6.0 |
Download |
Flash File Name: Itel_1409_V017_20170118_6.0.zip File Size: 903 MB OS: Android 6.0 |
Download |
Flash File Name: Itel_it1409-W406A-6.0-BD-V008-20170713.zip File Size: 893 MB OS: Android 6.0 |
Download |
Guide for Firmware Installation
The tutorial below will guide you in flashing the latest stock ROM on the device.
Guide to Install Stock ROM using Spreadtrum Flash Tool
So, guys, we hope that this tutorial on installing the firmware flash file on Itel It1409 was useful to you. Install the firmware and enjoy. If you have any queries, do let us know in the comments section.
failing to install drivers getting response that not for this pc, my pc is windows 8 64bit