On this page, we have shared the download link and guide to install the Samsung SM-M105F (Galaxy M10) firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here you will find all stock firmware zip files for all the supported regions with Samsung SM-M105F.
If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software related issues such as hard brick, soft brick, WiFi or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.
Page Contents
Samsung Galaxy M10 SM-M105F Flash Files:
Flash File Name: SM-M105F_M105FDDS5CWA1_10.0_file.zip Build Number: M105FDDS5CWA1 Security Patch: January 2023 Model: SM-M105F Android Version: 10.0 |
Download |
Flash File Name: SM-M105F_M105FDDS4CVG1_10.0_file.zip Build Number: M105FDDS4CVG1 Security Patch: June 2022 Model: SM-M105F Android Version: 10.0 |
Download |
Flash File Name: SM-M105F_M105FDDS4CVB1_10.0_file.zip Build Number: M105FDDS4CVB1 Security Patch: January 2022 Model: SM-M105F Android Version: 10.0 |
Download |
Flash File Name: SM-M105F_M105FDDU3CTI3_10.0_file.zip Build Number: M105FDDU3CTI3 Security Patch: September 2020 Model: SM-M105F Android Version: 10.0 |
Download |
Steps to Flash Stock ROM File on Galaxy M10 SM-M105F
Before we get straight to steps to Install Stock Firmware on your Samsung Galaxy M10, let us take a look at the pre-requirements first.
Pre-Requirements:
- This Guide is for Samsung Galaxy M10 SM-M105F
- You need a Windows PC/Laptop and a USB cable to flash a firmware.
- Charge your device with a minimum of 50% battery backup.
- You have to download the latest Samsung USB Drivers and install them on your PC.
- Make sure that you have ODIN Software installed on your PC.
- Take a backup of your device (No Root) before doing anything.
Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy M10.
Disclaimer:
- Download the Samsung SM-M105F flash file
- Extract the contents of the firmware flash file zip.
- Launch the ODIN application
- Load the firmware files in their appropriate section
- Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
- Notice that the CO port will light up on Odin once you connect your phone.
- Click the Start button to install the firmware on your Samsung device.
- That’s it! You will see a PASS message once the installation is complete.
Check out our full depth video guide as well.
We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.