How to Install Stock ROM on Samsung SM-M105G (Firmware Guide)

In this tutorial, we will guide you on how to install the Samsung SM-M105G (Galaxy M10) flash file using the Samsung flash tool (also known as ODIN flash tool). On this page, you will find the official stock firmware file for the Samsung Galaxy M10 SM-M105G, drivers, and flash tool.

By flashing the Stock ROM file, you can always fix the device software issue such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, and many more.

How to Install Stock ROM on Samsung SM-M105G (Firmware Guide)

Samsung Galaxy M10 Device Overview

Samsung Galaxy M10 features a 6.21 inches Super AMOLED display with a screen resolution of 1080 x 2248 pixels. The display is protected by Corning Gorilla Glass 5. The device is powered by Qualcomm SDM845 Snapdragon 845 (10 nm) processor under Adreno 630 GPU. The handset packs 128GB variant with 6/8GB of RAM. Samsung Galaxy M10 sports a Dual rear camera with 12MP + 12MP camera and Single Selfie camera with a 20MP depth camera. The smartphone is running on Android 8.1 Oreo under Samsung Experience 9.5 UI software package and backed by 3000 mAh battery. It has a fingerprint reader under the display.

Samsung Galaxy M10 SM-M105G Firmware Flash Files:

Flash File Name: SM-M105G_M105GPUS9CVD1_10.0_file.zip
Build Number: M105GPUS9CVD1
Security Patch: March 2022
Model:
SM-M105G
Android Version: 10.0
Download
Flash File Name: SM-M105G_M105GDXS8CVA1_10.0_file.zip
Build Number: M105GDXS8CVA1
Security Patch: January 2022
Model:
SM-M105G
Android Version: 10.0
Download
Flash File Name: SM-M105G_M105GDXS8CVA1_10.0_file.zip
Build Number: M105GDXS8CVA1
Security Patch: January 2022
Model:
SM-M105G
Android Version: 10.0
Download
Flash File Name: SM-M105G_M105GDXS6CUD4_10.0_file.zip
Build Number: M105GDXS6CUD4
Security Patch: April 2021
Model:
SM-M105G
Android Version: 10.0
Download
Flash File Name: SM-M105G_M105GDXS6CTL1_10.0_file.zip
Build Number: M105GDXS6CTL1
Security Patch: December 2020
Model:
SM-M105G
Android Version: 10.0
Download
Flash File Name: SM-M105G_M105GDXU6CTL3_10.0_file.zip
Build Number: M105GDXU6CTL3
Security Patch: December 2020
Model:
SM-M105G
Android Version: 10.0
Download

Steps to Flash Stock ROM File on Galaxy M10 SM-M105G

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy M10, let us take a look at the pre-requirements first.

Pre-Requirements: 

  • This Guide is for Samsung Galaxy M10 SM-M105G
  • You need a Windows PC/Laptop and a USB cable to flash a firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy M10.

Advertisements

Disclaimer:

We’re at GetDroidTips won’t be responsible for any kind of damage/error that occurs to your handset while/after following this guide or flashing any file. Proceed at your own risk.
  1. Download the Samsung SM-M105G firmware flash file
  2. Extract the contents of the firmware flash file zip.
  3. Launch the ODIN application
  4. Load the firmware files in their appropriate section
  5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  6. Notice that the CO port will light up on Odin once you connect your phone.
  7. Click the Start button to install the firmware on your Samsung device.
  8. That’s it! You will see a PASS message once the installation is complete.
Follow Complete Guidelines

Check out our full depth video guide as well.

Video Tutorial To Install Firmware

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.