Tecno CA8 / CA8S DA File (Camon X Pro) | Download MTK Secure Boot Auth File

If you’re experiencing issues with your Tecno Camon X Pro CA8 / CA8S device, such as FRP lock, corrupted memory, secure boot error, authentication, or buffer error, downloading and installing the Tecno Camon X Pro CA8 / CA8S DA file may be a helpful solution. The DA file, also known as the Download Agent file, can assist in fixing the device’s secure boot error.

To flash the Secure Boot DA file onto your Tecno CA8 / CA8S device, you’ll need flash tools such as SP Flash Tool, NCK Box, Miracle Box, or CM2 box. Our step-by-step guide can help you install the Download Agent (DA) files on your Tecno Camon X Pro CA8 / CA8S device, allowing you to resolve any issues you’re potentially experiencing.

It’s important to carefully follow the instructions in the guide to ensure successful installation. With the DA file properly installed, you may be able to fix any software issues that are causing problems on your Tecno Camon X Pro CA8 / CA8S device.

How to change language on Tecno Camon X Pro

Advantages of Download Agent Loader Files

  • Bypass Factory Reset Protection (FRP Lock) on the Tecno Camon X Pro
  • System Image backup of the Tecno Camon X Pro CA8 / CA8S
  • Read security codes of an MTK device
  • Can flash new firmware on a Tecno Camon X Pro
  • Clone a Recovery Image or boot files

Disclaimer:

GetDroidTips won’t be responsible for any damage or error that will occur on your device by following this guide or flashing any file. Proceed at your own risk.

Download Link:

Pre-requirements:

  • This DA file is only supported for the Tecno Camon X Pro CA8 / CA8S device.
  • You can download the DA file for your Tecno Camon X Pro device from the link above.
  • A PC/Laptop and a USB cable are required.

Steps to Install Tecno Camon X Pro CA8 / CA8S DA File

Method 01: Use NCK Box

  • Download NCK Pro Box | NCK Pro Box Drivers – Install both on your PC
  • Launch the NCK box on your PC > Click on FRP-PATTERN-PRIVACY-RESET.
  • Click to select Custom Loader.
  • Then head over to the DA file and select the downloaded DA file.
  • Click on Flash Mode.
  • Next, open NCK Loader > Click on Settings.
  • Head over to the DA file and select the downloaded DA file.
  • Go back to the Service tab > Click on Reset.0
  • Y0ur Tecno Camon X Pro will now reboot with a reset FRP lock system

For a complete step-by-step guide on how to install DA files using NCK Pro Box

Method 02: Use SP Flash Tool

  • Launch the SP Flash Tool on your PC.
  • Click on the Download tab.
  • Click on the Choose option and select the downloaded DA file.
  • The DA file will load automatically and install it.

For a complete step-by-step guide on how to install the DA file using the SP Flash tool

Method 03: Use Miracle Box

For a complete step-by-step guide on how to install the DA file using Miracle Box

That’s it, guys. We hope you’ve successfully installed the DA file on your Tecno Camon X Pro CA8 / CA8S device. For any queries, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.