Download Tecno Pova 3 LF7, LF7n Firmware Flash File (Stock ROM)

Tecno POVA 3 was launched in India as the latest affordable gaming smartphone that runs on Android 12. The smartphone features a 6.9-inch full-HD+ Dot-in display with a 90Hz refresh rate powered by a MediaTek Helio G88 SoC, along with up to 6GB of RAM.  Tecno POVA 3 sports a 50 MP triple rear camera setup with quad flash. On the front, it has an 8 MP hole-punch selfie camera.

Today we have the latest firmware flash file for the Tecno Pova 3 (LF7, LF7n) based on Android 12 powered by a MediaTek Helio G88 processor. To install the firmware flash file, we need a software called SP Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.

This process is helpful if you have bricked your device, lag, or shuttering performance, to fix Bluetooth and WiFi issues, and to unroot or bypass the FRP lock. So without further wasting our time, let’s understand what is stock firmware flash file.

Tecno Pova 3 Device Overview:

The Tecno Pova 3 features a 6.9 IPS LCD panel with a 90 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2460 pixels and an aspect ratio of 20:9. Under the hood, we get the MediaTek Helio G88 processor built on a 12nm manufacturing process. It is an octa-core processor with two Cortex-A75 cores clocked at 2.0 GHz and six Cortex-A55 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Mali-G52 MC2. The smartphone comes with Android 11 out of the box with HIOS skin running on top.

In terms of optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup consists of a 50 MP primary sensor paired with an f/1.6 lens, a 2 MP depth sensor paired with an f/2.4 lens, and another 2 MP sensor. The selfie camera at the front is an 8 MP primary sensor paired with an f/2.0 lens. The rear camera setup can capture 2K videos at 30 fps, while the front camera is limited to 1080p video recording.

The smartphone comes in two storage options: 64GB internal storage + 4GB RAM and 128GB internal storage + 6GB RAM. We also get a dedicated microSD slot for storage expansion. In terms of communications, we get WLAN, Bluetooth, GPS, NFC, FM radio, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, proximity, and compass. Powering it all is a 7,000 mAh battery that can be topped up quickly using a 25W power adapter. It also supports reverse wireless charging of 10W. The smartphone is available in three color options: Electric Blue, Tech Silver, and Eco Black.

Stock Firmware and its Advantage

The smartphone OEMs don’t provide that many customizations or functionalities to the device by default. But it’s the most stable ROM according to the device model and Android version.

While most of the third-party firmware comes with system bugs and stability issues. In this case, you may find battery issues, camera issues, network issues, basic features missing, lags, heating, slow down in performance, and more. But whenever you move to the Stock ROM, you can fix these issues easily. Here we have mentioned some of the Stock ROM advantages below:

• Flash Stock To Unbrick your Tecno Pova 3 (LF7, LF7n)
• Fix the device boot loop issue
• Upgrade and Downgrade your phone software version
• Flash Stock ROM to unroot the device
• Fix Bugs on your phone
• Fix lag or stutter on Tecno Pova 3
• Increase software performance, battery draining issue, OTA update issue
• Revert back to Stock ROM will gain phone warranty (if applicable)

Firmware Details:

• Device Supported: Tecno Pova 3 (LF7, LF7n)
• Tool Supported: Smartphone Flash Tool
• Processor: MediaTek Helio G88
• Android OS: Android 12
• File: Software Update
• Gapps: Included

Check for OTA Updates Manually

Your device will itself detect and grab the OTA when it becomes available. You will get a notification to install it. If you don’t get the OTA automatically, then manually check for the update. Follow these simple steps mentioned below.

• Go to the device Settings > System menu > System Update > Tap on Check for Update option.
• If the OTA update appears then tap on Download and install to begin the installation process.
• It may take a few minutes and then reboot your device.
• Now, your handset will boot into a new system.

Now, you have to download the Stock Firmware file for Tecno Pova 3 from below.

Steps to Flash Firmware File on Tecno Pova 3 (LF7, LF7n) 

Now, follow the full step-by-step installation process to easily flash the Stock Firmware on your Tecno Pova 3 device. But before heading over to the installation process, let’s take a look at the requirements.

Pre-Requirements:

• ROM file supported: Tecno Pova 3 (LF7, LF7n) only. Don’t use it on other devices.
• Charge the device battery up to 60% at least for a smoother process.
• You will require a Windows PC/Laptop and a USB cable to connect your device to the PC.
• Flash Tool: Download the SP Flash tool
• USB Drivers: Download Infinix USB Drivers | MTK USB Drivers

Tecno Pova 3 LF7 Flash Files:

Tecno Pova 3 LF7n Flash Files:

Instructions to install:

Now, let’s go to the installation steps. Here we have provided the installation method in both writing and video guide.

Additionally, you can follow the video tutorial as well for better guidance.

We hope that you have successfully installed the Stock Firmware on your Infinix handset model Tecno Pova 3. For any queries, you can write them down in the comments below.