Motorola Moto G7 Plus (codename: lake) launched in May 2019. The handset came with Android 9.0 Pie. In this tutorial, we will show you how to install the AOSP Android 11 on Moto G7 Plus (lake). Recently, Google released its latest stable Android 11 for the general public. And with that, many OEMs were quick to adopt the same. First in the line were the Pixel devices, which were anyways along the expected lines. Later Google released the AOSP source code for Android 11 which is undoubtedly the main ingredient to compile Android 11-based custom ROMs.
Motorola Moto G7 Plus is powered by a Qualcomm Snapdragon 636 (14 nm) chipset coupled with 4GB of RAM and 64GB of internal storage. It also supports an 1TB external memory card. The device came out of the box with Android 9.0 Pie and backed by a 3000 mAh battery (Non-removable). As far as the camera concerned, the device has a Dual-camera setup with 16MP + 5MP primary sensors and a selfie camera with an 12MP lens. Other connectivity option includes 4G-VoLTE, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, ambient light sensor, gyroscope, proximity sensor, and compass/ magnetometer. etc. The Motorola Moto G7 Plus come with a rear fingerprint sensor feature.
Android 11 and It’s Features:
Well, Android 11, Google’s 11th iteration looks similar to Android 10 but with a handful of new features and changes. The update brings notification history, Chat bubbles, Conversation notifications, screen recorder, new media controls, smart device controls, one-time permission, improved dark theme with the scheduling system, app suggestions, wireless android auto, and many more. For more, check out our article Android 11 supported list, Android 11 Custom ROM list, best Android 11 features, and many more.
How to Install AOSP Android 11 on Moto G7 Plus:
With such a long list of goodies to offer, no doubt you will want to try out the AOSP Android 11 on Moto G7 Plus (lake). But before we list out the installation steps, please go through the prerequisites section. Make sure your device meets all the mentioned requirements. After this, go through the working features and the list of known issues present in this ROM. Once you have gone through all the requirements section, you may then proceed with the installation steps.
- Tested only on Moto G7 Plus (lake)
- First and foremost, create a complete device backup.
- Next time, enable USB Debugging on your Moto G7 Plus. This will make your device recognizable by your PC in ADB mode. So head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging.
- Your device also needs to have the bootloader unlocked. If you haven’t done so, then refer to our detailed guide on How To Unlock Bootloader On Moto G7 Plus.
- Next up, you will also need to install the TWRP Recovery on your device. This will be needed to flash the AOSP Android 11 on your Moto G7 Plus. You could refer to our comprehensive tutorial on how to Install TWRP Recovery For Moto G7 Plus.
Download AOSP Android 11
Before you download the firmware file, there is a pretty important worth mentioning. You should only use the proper vendor and firmware of your device of stable ROM.
Pixel Experience ROM: Download Link
EvolutionX: Download Link
ArrowOS: Download Link
Download Android 11 Gapps
Once you have downloaded the above files, transfer it to your device. Then proceed with the below steps to install AOSP Android 11 on your Moto G7 Plus (lake) device.
Install AOSP Android 11 on Moto G7 Plus (lake)
- Connect your device to PC via USB cable. Make sure USB Debugging is enabled.
- Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
- Execute the below command in the CMD window to boot your device to TWRP Recovery:
adb reboot recovery
- Now head over to the wipe section and format system, data, and cache. Perform a right swipe to complete the format.
- Its now time to flash the AOSP Android 11 ROM onto your Moto G7 Plus. For that, head over to Install, select the AOSP ROM ZIP file and perform a right swipe to install the file.
- If you want Google Apps as well, then you need to flash it at this instance itself. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
- When that is done, you may reboot your device. Head over to Reboot and select System.
Your device will now boot to the newly installed OS. With this, we conclude the guide on how to install the AOSP Android 11 on Moto G7 Plus. Do keep in mind that the first boot might take up some time and you might have to set up your device from scratch.
Furthermore, once you have installed the ROM, do share your opinions about the same in the comments section. Rounding off, here are some iPhone Tips and Tricks, PC tips and tricks, and Android Tips and Trick that you should check out as well.