Wiko, the France based brand, has been in the market with a lot of smartphones. Back in February 2019, they have unveiled its new device i.e., the Wiko View 3 Pro. It comes with Helio P60, a 6.3-inch display, 6GB RAM, 128GB ROM, triple rear camera setup, 4000 mAh battery, and runs on Android 9 Pie.
If you have bought this device and want to connect it to PC, which is obvious, then this post simply enables you to download the latest Wiko View 3 Pro USB Drivers for Windows 7, 8, and 10 very simple.
It is very necessary to have USB drivers whenever you have to connect Wiko View 3 Pro to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Wiko View 3 Pro manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Wiko View 3 Pro USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
Page Contents
Wiko View 3 Pro Device Overview
The Wiko View 3 Pro features a 6.3 inches IPS LCD with a Full HD+ resolution. This display gets a screen to body ratio of 81.4 percent, a pixel density of 409 Pixel Per Inch (PPI), an aspect ratio of 1080 x 2340 pixels, and a resolution of 1080 x 2340 pixels. Underneath the Wiko View 3 Pro, it sports the MediaTek MT6771 SoC, which is popular knows as the Helio P60 SoC. This is one of the popular SoC from MediaTek, and we have seen this in a dozen smartphones.
It is built on the 12nm process, and the octa-core setup includes four Cortex A73 cores, which is clocked at 2.0GHz, and the other four Cortex A53 cores, which clock at 2.0GHz. To the GPU side, it sports the Mali G72 MP3 GPU. Coming to the memory side, it sports 6GB of RAM and 128GB of eMMC 5.1 internal storage. Further, this onboard storage is also expandable via the micro SD card. The device runs on the Android 9 Pie.
Coming to the optics, the Wiko View 3 Pro sports a triple rear camera setup, which is arranged in a vertical manner as most smartphones do. This rear camera setup includes a primary 12MP sensor with 27mm wide, PDAF, and pixel size of 1/2.9″, and 1.25µm. This sensor pairs with a secondary 13MP ultra wide-angle sensor with an aperture value of f/2.2, and finally, it gets a 5MP macro sensor with an aperture value of f/2.4. It also features an LED flash and comes with support for taking HDR photos. To the front, the device comes with a 16MP sensor with an aperture value of f/2.0 and PDAF.
The Wiko View 3 Pro packs a 4,000 mAh non-removable battery that charges over the USB type C port. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, Bluetooth 4.2, A2DP, LE. GPS with A-GPS, GLONASS, GALILEO, BDS. NFC, FM radio, and USB 2.0, Type-C 1.0 reversible connector. Sensors on board include accelerometer, gyro, proximity, and compass. The device is available in two color options, which are in the Nightfall (Anthracite Blue/Gold), and Ocean (Deep Bleen). Finally coming to the pricing, it starts at 250 Euros.
Wiko View 3 Pro USB drivers
The USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Wiko View 3 Pro from your PC in case you have installed it. Once you are done, click the below link to download USB Drivers on your PC.
Download Latest USB DriversYou must disconnect your device from the PC first. Next, download this .zip file and extract it. You may need to install an app from the Play Store to extract this file. You can proceed with any which are available in the Play store for this purpose. Once download, double tap on the file and follow the instructions on the screen.
How to Install Wiko View 3 Pro Latest USB Drivers
You can download and install Wiko View 3 Pro USB Drivers on your PC without any issues. If you face any problem, then make sure to reach us via comment or mail. We will get in touch with you. Here is the complete guide to manually install Android USB drivers on your PC.
Wiko View 3 Pro MediaTek VCOM Drivers
The MediaTek MT65xx USB VCOM Driver is the common USB driver for all the Android smartphones powered by MediaTek processor. If you are one who is looking to install Stock ROM or even TWRP Recovery, then you need this driver who will recognize your Wiko View 3 Pro when you connect it to PC. As we said, Wiko View 3 Pro is a Mediatek device so this driver is important if you want the device to recognize in the software such as SP Flash tool, Aladdin, etc
Download MediaTek USB VCOM DriversDownload SP Flash tool for Wiko View 3 Pro
Did your phone get into boot loops, or did you brick your Wiko View 3 Pro by messing up with its software? Then the simple solution is installing a Stock ROM file on Wiko View 3 Pro. One day you might end up with a bricked phone. When it happens, the SP Flash tool comes in handy. SP Flash tool (also known as Smartphone flash tool) is a which windows / Linux application that offers total control over your smartphone. It means that you can have full access to modify and align the internal files according to your liking. The application only supports Mediatek smartphones.
By using SP flash tool, you even install a Custom Recovery, install Custom Kernel and also root your phone.
Download MediaTek USB VCOM DriversWiko View 3 Pro ADB Fastboot Tool:
If you have bought this device and want to try some other custom ROM or recovery. Then you may need this ADB Fastboot driver on your PC. Though you have to Unlock Bootloader first, then this tool is really important. Download the ADB and Fastboot tool and Install it on your PC.
Download ADB and Fastboot toolWhat is ADB?
ADB or Android Debug Bridge is a small debug tool that you will find in the Android Software Development Kit (SDK). It is basically a command-line tool that does the communication between your Android device and a computer. With ADB, your device can be controlled from the computer via USB, files can also be transferred, and it runs powerful shell commands. ADB can be used to send terminal commands to an Android device for changing the system level.
What is Fastboot:
Like ADB, Fastboot is also a part of SDK. The Fastboot tool could be helpful for reflashing partition and image files on your device. In a fastboot, system, the file system images can be modified from a computer over a USB connection. Like recovery, updates and zip files can also be installed from fastboot.
Instructions to Install:
You can install the ADB driver on both windows and mac. You can follow the below instructions to install ADB on both Windows and PC.