Huawei Mate 20 X EVR-N29 Firmware Flash File (Stock ROM)

Want to flash the firmware file on Huawei Mate 20 X EVR-N29? Then you are in the right place. On this page, we will share the official Huawei Mate 20 X EVR-N29 flash files with their firmware installation guide.

If you are someone who is facing software issues such as WiFi or Bluetooth issues, lag, boot loop, or hard brick, you can fix the device by following this tutorial. By using the firmware file, you can bypass FRP lock, pattern lock, downgrade, or upgrade, and you can fix most of the software glitches by flashing the stock firmware.

Huawei Mate 20 X EVR-N29 Firmware Flash File (Stock ROM)

Firmware Detail

  • Device Supported: Huawei Mate 20 X
  • Model: EVR-N29
  • Android OS: Android 10
  • User interface (UI): EMUI 10.1
  • Processor: Kirin 980
  • File: Software Update
  • Gapps File: Included

Steps to Flash Firmware File on Huawei Mate 20 X (EVR-N29)

Now, before we get straight to the installation guide, make sure to follow the prerequisites section below and make sure you download the flash tools and drivers on your PC.

Requisites

Disclaimer

GetDroidTips will not be responsible for bricking, hardware, or any kind of software problems arising on your while you follow this guide to install stock ROM on your phone. First, understand the tutorial and then follow it at your own risk.

Now, grab the stock firmware for the Huawei Mate 20 X from the link below.

Download Flash Files

  • Flash File Name: EVR-N29 10.1.0.221(C432)
  • File Size: 4.2 GB
  • Download Link: Click Here

Update from System

  1. Extract the dload stock firmware of Huawei Mate 20 X and transfer the three extracted files to the root of your Huawei NM Card, SD Card, or to the memory stick.
  2. Now head over to the dialer and enter *#*#2846579#*#*. From the menu that appears, select the Software Update option.
  3. After that, select the Memory Card Upgrade. The system will now read files from the inserted SD card/USB storage or NM Card and will subsequently flash the file.
  4. When the installation is complete, you could safely remove the OTG.

If the above methods, don’t work on your device, you can try the next two methods.

Advertisements

SD Card Update Method

  • Create a new folder called dload on your MicroSD card.
  • Extract the downloaded firmware zip file on PC > Copy the UPDATE.APP file into the dload folder on your MicroSD card.
  • Switch off your handset > Long-press Vol Up + Vol Down + Power key together for a few seconds until the fastboot mode appears.
  • You’ll see ‘Installing system update’ > Wait for a while > Your device will automatically reboot after flashing.

Manually Flash Stock ROM

  1. First of all, Download and extract the Huawei smartphone Multi Download Tool on your computer.
  2. Now, Download and Install the Huawei Handset Product Line Driver and Huawei USB Driver your PC.
  3. Launch the QPBLFBML01.exe file to open the Huawei Multi-Download Tool.
  4. Next, you will see the XML firmware file upload option.
  5. Click on the Browse button (three-dot icon) and it will ask for the password.
  6. Don’t put anything, just leave it blank and click on the Set button.
  7. Now, select the .xml firmware file for your device and click on Open.
  8. Then click on the Next button.
  9. You will see the installation progress page. Connect your device via a USB cable with the Fastboot or Download Mode.
  10. Next, click on the Scan&Download button to start flashing the stock firmware.
  11. It will automatically detect the Fastboot device and will take some time to install it.
  12. Once flashing done, restart your device.
Full Instruction Guide

So, that’s all about how to flash the firmware file on Huawei Mate 20 X EVR-N29. We hope this tutorial was useful to you. If you find any difficulties or have any doubts, do let us know.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.