Infinix Note 12 was launched in India and runs on Android 11 with XOS 10.6 on top. The device features a 6.7-inch full-HD+ AMOLED display. It is powered by a MediaTek Helio G88 SoC, along with up to 6GB of RAM. Infinix Note 12 sports a triple rear camera setup that compromises a 50 MP primary sensor, along with a 2 MP macro shooter and a QVGA sensor.
Today we have the latest firmware flash file for the Infinix Note 12 (X663C, X663D) based on Android 11 (XOS 10.6) powered by a MediaTek Helio G88 processor. To install the firmware flash file, we need a software called SP Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.
This process is helpful if you have bricked your device, lag, or shuttering performance, to fix Bluetooth and WiFi issues, and to unroot or bypass the FRP lock. So without further wasting our time, let’s understand what is stock firmware flash file.
Infinix Note 12 Device Overview:
The Infinix Note 12 features a 6.7-inch AMOLED panel with a 60 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. The screen has maximum screen brightness of 1000 nits. Under the hood, we get the MediaTek Helio G88 processor built on a 12nm manufacturing process. It is an octa-core processor with two Cortex-A75 cores clocked at 2.0 GHz and six Cortex-A55 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Mali-G52 MC2. The smartphone comes with Android 11 out of the box with XOS 12.6 skin running on it.
In terms of optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup consists of a 50MP primary sensor paired with an f/1.6 lens, a 2MP depth sensor paired with an f/2.4 lens, and a QVGA sensor. The selfie camera at the front is a 16 MP primary sensor. The rear camera setup can capture 2K videos, while the front camera is limited to 1080p video recording.
The smartphone comes with three storage options: 64GB internal storage + 4GB RAM, 128GB internal storage + 4GB RAM, and 128GB internal storage + 6GB RAM. We also get a dedicated microSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth, GPS, NFC, FM radio, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, gyro, proximity, and compass Powering it all is a 5,000 mAh battery that can be topped up quickly using a 33W power adapter. The smartphone is available in three color options: Jewel Blue, Force Black, and Sunset Golden.
Stock Firmware and its Advantage
The smartphone OEMs don’t provide that many customizations or functionalities to the device by default. But it’s the most stable ROM according to the device model and Android version.
While most of the third-party firmware comes with system bugs and stability issues. In this case, you may find battery issues, camera issues, network issues, basic features missing, lags, heating, slow down in performance, and more. But whenever you move to the Stock ROM, you can fix these issues easily. Here we have mentioned some of the Stock ROM advantages below:
- Flash Stock To Unbrick your Infinix Note 12 (X663C, X663D)
- Fix the device boot loop issue
- Upgrade and Downgrade your phone software version
- Flash Stock ROM to unroot the device
- Fix Bugs on your phone
- Fix lag or stutter on Infinix Note 12
- Increase software performance, battery draining issue, OTA update issue
- Revert back to Stock ROM will gain phone warranty (if applicable)
- Device Supported: Infinix Note 12 (X663C, X663D)
- Tool Supported: Smartphone Flash Tool
- Processor: MediaTek Helio G88
- Android OS: Android 11, XOS 10.6
- File: Software Update
- Gapps: Included
Check for OTA Updates Manually
Your device will itself detect and grab the OTA when it becomes available. You will get a notification to install it. If you don’t get the OTA automatically, then manually check for the update. Follow these simple steps mentioned below.
- Go to the device Settings > System menu > System Update > Tap on Check for Update option.
- If the OTA update appears then tap on Download and install to begin the installation process.
- It may take a few minutes and then reboot your device.
- Now, your handset will boot into a new system.
Now, you have to download the Stock Firmware file for Infinix Note 12 from below.
Steps to Flash Firmware File on Infinix Note 12 (X663C, X663D)
Now, follow the full step-by-step installation process to easily flash the Stock Firmware on your Infinix Note 12 device. But before heading over to the installation process, let’s take a look at the requirements.
- ROM file supported: Infinix Note 12 (X663C, X663D) only. Don’t use it on other devices.
- Charge the device battery up to 60% at least for a smoother process.
- You will require a Windows PC/Laptop and a USB cable to connect your device to the PC.
- Flash Tool: Download the SP Flash tool
- USB Drivers: Download Infinix USB Drivers | MTK USB Drivers
Infinix Note 12 X663C Flash Files:
|Flash File Name: X6817-H6920ABCDEFHIJ-S-OP-220516V1126.zip
File Size: 4 GB
OS: Android 11, XOS 10.6
Infinix Note 12 X663D Flash Files:
|Flash File Name: X663D-H6915J-R-OP-220420V235.zip
File Size: 4 GB
OS: Android 11, XOS 10.6
Instructions to install:
Now, let’s go to the installation steps. Here we have provided the installation method in both writing and video guide.Guide to Install Stock Firmware using SP Flash Tool
Additionally, you can follow the video tutorial as well for better guidance.
We hope that you have successfully installed the Stock Firmware on your Infinix handset model Infinix Note 12. For any queries, you can write them down in the comments below.