Advertisements

US Unlocked Samsung Galaxy Note 10 Firmware | Samsung SM-N970U1 Stock ROM

On this page, we have shared the download link and guide to install the Samsung SM-N970U1 firmware file for the US Unlocked carrier. To install, you need to download and install the Samsung Flash Tool (Also known as Odin Flash Tool) on your PC. Follow this guide to flash the Samsung SM-N970U1 firmware file.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain smartphones software related issues such as hard brick, soft brick, WiFi or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

US Unlocked Samsung Galaxy Note 10 Firmware | Samsung SM-N970U1 Stock ROM

Samsung Galaxy Note 10 SM-N970U1 Firmware File:

Flash File Name: SM-N970U1_N970U1UES4DTI1_10.0_file.zip
Build Number: N970U1UES4DTI1
Security Patch: October 2020
Model:
SM-N970U1 | Region: USA
Android Version: 10.0
Download
Flash File Name: SM-N970U1_N970U1UEU4DTH7_10.0_File.zip
Build Number: N970U1UEU4DTH7
Security Patch: September 2020
Model:
SM-N970U1 | Region: USA
Android Version: 10.0
Download

Instruction to firmware file on Galaxy Note 10 SM-N970U1

Before we get straight to steps to Install Stock Firmware on your Samsung Galaxy Note 10, let us take a look at the pre-requirements at first.

Pre-Requirements: 

  • This Guide is for Samsung Galaxy Note 10 SM-N970U1
  • You need a Windows PC/Laptop and a USB cable to flash a firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy Note 10.

Disclaimer:

We’re at GetDroidTips won’t be responsible for any kind of damage/error occurs to your handset while/after following this guide or flashing any file. Proceed at your own risk.
  1. Download the Samsung SM-N970U1 firmware file
  2. Extract the contents of the firmware flash file zip.
  3. Launch the ODIN application
  4. Load the firmware files in their appropriate section
  5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  6. Notice that the CO port will light up on Odin once you connect your phone.
  7. Click the Start button to install the firmware on your Samsung device.
  8. That’s it! You will see a PASS message once the installation is complete.
Follow Complete Guidelines

Check out our full depth video guide as well.

Video Tutorial To Install Firmware

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.