Are you looking to install a firmware file on Itel Prime Tab 1 W7002P? Then you are just in the right place. In this post, we have brought you the latest stock firmware for the Itel Prime Tab 1 W7002P.
These days installing custom ROMs, and rooting the device is a pretty common scenario among smartphone enthusiasts. However, not every day is a sunny day. Usually, while customizing your device you may have performed some wrong steps and ended up with a bricked device or a phone stuck in the endless boot loop. Sometimes the new custom OS you install brings a lot of unforeseen bugs. So, the only solution is to take the device back to its previous state. This technically means flashing the stock firmware on the smartphone.
Talking of the Itel Prime Tab 1 W7002P, we have put up the latest stock firmware of the phone along with the flash tool and a complete tutorial to help you install the stock ROM correctly on the device. We have laid out all the instructions in a simple and detailed manner. So, it should be a cakewalk for you to install stock ROM on Itel Prime Tab 1 W7002P.
How to Install Stock ROM on Itel Prime Tab 1 W7002P?
Installing a stock ROM is pretty easy. All you have to do is download the stock ROM for the corresponding device. Then grab the USB drivers, an exclusive flash tool that we will use for performing the installation. Talking of the flash tool, we are using the Spreadtrum Flash tool in this guide because the Itel Prime Tab 1 W7002P runs on the Spreadtrum chipset.
You will also require some other tools which we have listed out below. You have to download and install them as instructed. Before getting on towards the installation, let’s find out the importance of stock ROM.
Why Stock ROM is important.?
A stock ROM is an OS that the device runs when it’s unboxed. It’s the pre-built operating system. So, by flashing the firmware, you would literally take back the device to its original working state.
- A stock ROM can fix the device boot loop issue
- If your phone is bricked, then you can unbrick it by flashing the device with the latest stock ROM
- You can upgrade/downgrade your device’s OS via flashing a stock ROM only.
- it is important to unrooting the device and go back to stock
- Device Name: Itel Prime Tab 1 W7002P
- ROM Type: Firmware
- Gapps File: Included
- Tool Supported: SPD Flash Tool
- Chipset: Spreadtrum SoC
- Android Version: Android 10
Firmware Installation Guide for Itel Prime Tab 1 W7002P
As mentioned before, here is the list of flash tool and other software which are important to successfully install stock ROM on Itel Prime Tab 1 W7002P.
- The stock ROM provided in this guide is exclusively for Itel Prime Tab 1 W7002P. Do not use it on any other device.
- Before installing the stock ROM charge the battery of your device up to 50%.
- A laptop/PC
- Don’t forget to take a backup of your device data. Backup without root | Nandroid Backup via TWRP
- Make sure to download firmware, drivers, and tools to flash the firmware on your Itel Prime Tab 1 W7002P.
- VCOM Driver: Download Spreadtrum USB Driver
- Flash tool: Download SPD Flash tool
- Drivers: Download Android USB Drivers
Download Flash Files:
|Flash File Name: Itel_Prime_Tab_1_W7002P_V010_210521_10_SPD.zip
File Size: 1.22 GB
OS: Android 10
|Flash File Name: Itel_Prime_Tab_1_W7002P_V015_210723_SPD.zip
File Size: 1.07 GB
OS: Android 10
Guide for Firmware Installation
The tutorial linked below will guide you to flash the latest stock ROM on the device.
Guide to Install Stock ROM using Spreadtrum Flash Tool
So, guys.! We hope that this tutorial to install the firmware flash file on Itel Prime Tab 1 W7002P was useful to you. Install the firmware and enjoy. If you have any queries do let us know in the comments section.