How to Install Lineage OS 18.1 on LeEco Le Max 2 | Android 11

In this tutorial, we will show you how to download and install LineageOS 18.1 onto your LeEco Le Max 2 (codenamed X82X / X910) device. The Google-owned OS is open source in nature. This allows the userbase to try out tons of customizations and modifications onto your devices. For starters, they could install themes, icon packs, and launchers from the Play Store. But this is just the beginning. There are a plethora of other tweaks that you could try out on your LeEco Le Max 2.

All that is required is an unlocked bootloader, and then you could easily set your feet in the custom development. From installing a custom recovery like TWRP to gaining root access via Magisk, the possibilities are endless. Along the same lines, you could also try out a customized Android OS in the form of custom ROMs. And in this guide, we will be discussing just that. Today, we will show you the steps to install LineageOS 18.1 onto your LeEco Le Max 2 device.

How to Install Lineage OS 18 on LeEco Le Max 2 | Android 11

Warning

Before we begin with this procedure, I would strongly recommend you to create a backup of your device storage and all your files stored on your device. Moreover, it is advised to follow the steps mentioned in this post very carefully to avoid permanent damage or to brick your device. If anything goes wrong the author or GetDroidTips is not responsible for it.

How to Install LineageOS 18.1 on LeEco Le Max 2

Before we list the instructions, there are a few points worth discussing. We would like to state that the ROM is an unofficial build and in the alpha stage. So you could face a few stability issues as well as bugs. On that note, here are all the working features and the bugs present in this ROM:

SUPPORTED DEVICES

  • LEX820 (X2_CN)
  • LEX821 (X2_WW)
  • LEX822 (X2_CN)
  • LEX829 (X2_NA)
  • LEX910 (MAX_PLUS. Currently only supported on unofficial test builds)

So if you are ready to install LineageOS 18.1 onto your LeEco Le Max 2 (X82X / X910) device, then here is all the required information.  Let’s start with the requirements set.

Prerequisites

  • First and foremost, create a complete device backup. This is because we will be wiping the data partition which will format your device.
  • Next up, you will need to unlock the bootloader on your device. If you haven’t done so, then refer to our guide on how to unlock the bootloader via the Fastboot method.
  • Once that is done, you also need to have the TWRP Recovery installed. You could refer to our guide on How to Install Official TWRP Recovery on LeEco Le Max 2.
  • Also, enable USB Debugging on your device so that it gets recognized by your PC in the ADB Mode. For that, head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging.
    USB Debugging note 5 pro
  • Next, up, download and install the Android SDK Platform Tool on your PC. This will provide you with the necessary binary files.
  • Also, download and install the Android USB drivers onto your PC.
  • Finally, download the LineageOS 18.1 for LeEco Le Max 2: Download
  • If you want Google Apps as well, then download the Android 11 GApps file

That’s it. You may now proceed with the installation steps.

Instructions to Install LineageOS 18.1 on LeEco Le Max 2

  1. Transfer the downloaded ROM and the GApps file to the Internal Storage of your device.
  2. Now connect it to the PC via USB Cable. Make sure USB Debugging is enabled.
  3. Head over to the platform-tools folder on your PC, type in CMD in the address, and hit Enter. This will launch the Command Prompt window.
    cmd platform-tools
  4. Execute the below command in the CMD window to boot your device to TWRP Recovery
    adb reboot recovery

    twrp-custom-rom
    TWRP Home
  5. Now that your device is booted to TWRP, head over to the Wipe section and tap on Advanced Wipe.
  6. Then, select the System, Vendor, Data, and the Cache partition and perform a right swipe to format the selected partitions.
    install-lineageos-18-wipe-partition
  7. After this, go to the Install section of TWRP. Navigate to the downloaded ROM Zip file, select it, and perform a right swipe to install it one by one.
  8. The process might take a few minutes. When the flashing is complete, go back to the Install section and this time select the GApps package. Perform a right swipe to install this file as well.
  9. You may now reboot your device to the newly installed OS. For that, head over to Reboot and select System.
    reboot-system-redmi-note-5-pro

With this, we conclude the guide on how to install LineageOS 18.1 onto your LeEco Le Max 2 (X82X / X910) device. Do let us know your views about this ROM in the comments section below. Furthermore, you could also drop in your queries in the comments. Rounding off, here are some iPhone Tips and TricksPC tips and tricks, and Android Tips and Tricks that deserve your attention as well.

Source: XDA | Credits to ThE_MarD

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.