Motorola Edge X30 Firmware Flash File | Downgrade, Unbrick

On this page, we have shared the download link and guide to install the Motorola Edge X30 (hiphi) firmware flash file using the ADB Fastboot method. To flash the Motorola Edge X30 back to stock ROM, you need the stock firmware zip files which you will find here.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Motorola Edge X30 Firmware Flash File | Downgrade, Unbrick

The Advantage of Stock Firmware

  • Flash Stock To Unbrick your Motorola Edge X30
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Motorola Edge X30
  • Unroot or Fix Bugs on your Phone
  • To fix the lag or stutter on Motorola Edge X30.
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Steps to Install Motorola Edge X30 Stock Firmware:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requisites:

Disclaimer:

GetDroidTips will not be held responsible for any kind of hardware or software damage to your device by following this guide. Proceed at your own risk

Download Flash Files:

Motorola Edge X30 Stock Firmware India XT2201-1:

Build Number Security Patch/Changelog
S1SH32.55-8-8 Initial Firmware

Motorola Edge X30 Stock Firmware Verizon XT2201-4:

Build Number Security Patch/Changelog
S1SH32.55-18-11 March 2022 Security Patch
S1SH32.55-18-9 Initial Firmware

Motorola Edge X30 Stock Firmware Germany RETBR Unit XT2201-1:

Build Number Security Patch/Changelog
S1SH32.55-8-8 Initial Firmware

Motorola Edge X30 Stock Firmware Europe Unit XT2201-1:

Build Number Security Patch/Changelog
S1SH32.55-8-8 Initial Firmware

Instructions to Install: via ADB Sideload Method

  1. Now go to the folder where you have extracted the ADB and Fastboot Tools.
  2. Download Stock ROM for Moto from the above list of Moto Stock Firmware Collections and save it in the ADB folder.
  3. Now Reboot Moto smartphone to Recovery Mode.
  4. Select Apply Update from ADB.
  5. Plug the Phone into PC using USB Cable, then open a command prompt window by pressing Shift Key + Right Mouse Click
    AMD COMMAND
  6. Enter the following command to flash the firmware.
    fastboot oem fb_mode_set 
    fastboot flash partition gpt.bin 
    fastboot flash bootloader bootloader.img 
    fastboot flash vbmeta vbmeta.img
    fastboot flash vbmeta_system vbmeta_system.img
    fastboot flash vendor_boot vendor_boot.img   
    fastboot flash bluetooth BTFM.bin 
    fastboot flash radio radio.img 
    fastboot flash dsp dspso.bin 
    fastboot flash dtbo dtbo.img 
    fastboot flash logo logo.bin 
    fastboot flash boot boot.img 
    fastboot flash recovery recovery.img 
    fastboot flash super super.img_sparsechunk.0 
    fastboot flash super super.img_sparsechunk.1 
    fastboot flash super super.img_sparsechunk.2 
    fastboot flash super super.img_sparsechunk.3 
    fastboot flash super super.img_sparsechunk.4 
    fastboot flash super super.img_sparsechunk.5 
    fastboot flash super super.img_sparsechunk.6
    fastboot flash super super.img_sparsechunk.7
    fastboot flash super super.img_sparsechunk.8
    fastboot flash super super.img_sparsechunk.9
    fastboot flash super super.img_sparsechunk.10
    fastboot flash super super.img_sparsechunk.11
    fastboot flash super super.img_sparsechunk.12
    fastboot flash super super.img_sparsechunk.13
    fastboot flash super super.img_sparsechunk.14
    fastboot flash erase userdata 
    fastboot flash erase carrier
    fastboot flash erase apdp
    fastboot flash erase ddr 
    fastboot flash erase metadata
    fastboot oem fb_mode_clear
    fastboot reboot
  7.  Now your device will reboot into bootloader with the firmware you installed.
  8. Once the installation is completed, reboot the Phone.

That’s it! Wait patiently until the flashing process completes if you have any queries related to the flashing process. Please leave a comment down below.

Manually Update Motorola Edge X30 Stock Firmware via Recovery

  1. First of all, Go to Settings –> About Phone –> Tap on Build Number 7 Times.
  2. Go to Developer Options –> Enable USB Debugging.
  3. Download Android Nougat for Moto from above and save it in Internal storage.
  4. Now Reboot Moto to Recovery Mode.
  5. Select Apply Update from SD Card.
  6. Select the Downloaded ZIP file from SD Card.
  7. Wait until the Installation process Completes.
  8. Once the installation is completed, reboot the Phone.

That’s it!! You have successfully installed Stock Firmware On Motorola Edge X30 Smartphone.

I hope you installed the Stock ROM on Motorola Edge X30 successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.