Motorola G8 Play XT2015-2 Firmware Flash File (Unbrick or Restore Guide)

On this page, we have shared the download link and guide to install the Motorola XT2015-2 (Moto G8 Play) firmware flash file using the fastboot method. Here you will find all stock firmware zip files for all the supported regions with Motorola G8 Play XT2015-2.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Steps to Install Motorola XT2015-2 Stock Firmware (Flash File)

Now, if you’re ready to flash the stock firmware manually on your Motorola G8 Play XT2015-2 device then you need to download the flash tool, firmware file, and necessary drivers. So, without wasting any more time, let’s get into it.

Pre-Requirements:

• This ROM is supported for the Motorola G8 Play XT2015-2 (lima_32) variant only.
• Make sure that your device should be charged at least 50% or higher.
• You will require a PC or Laptop with a USB Data Cable.
• We always recommend our readers take a full data backup of the device for safety purposes.
• Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
• To flash, you must download the ADB and Fastboot tool

Motorola G8 Play XT2015-2 Firmware Flash Files:

Firmware Installation Guide:

Check out the firmware flashing guide below for the Motorola G8 Play XT2015-2. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device is turned off completely, press and hold the volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Motorola G8 Play into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

1. 1. The next step is to open the command window and go to the adb folder
   2. Enter the following command to flash the firmware

      fastboot oem fb_mode_set 
      
      fastboot flash preloader preloader.bin
      fastboot flash lk_a lk.img
      
      fastboot flash tee_a tee.img
      
      fastboot flash md1img_a md1img.img 
      
      fastboot flash spmfw_a spmfw.img 
      
      fastboot flash scp_a scp.img 
      
      fastboot flash sspm_a sspm.img
      
      fastboot flash cam_vpu1_a cam_vpu1.img
      
      fastboot flash cam_vpu2_a cam_vpu2.img
      
      fastboot flash cam_vpu3_a cam_vpu3.img
      
      fastboot flash vbmeta_a vbmeta.img 
      
      fastboot flash oem oem.img
      
      fastboot flash logo_a logo.bin
      
      fastboot flash boot_a boot.img
      
      fastboot flash dtb_a dtb.img
      
      fastboot flash dtbo_a dtbo.img 
      
      fastboot flash recovery recovery.img
      
      fastboot flash system_a system.img_sparsechunk.0
      
      fastboot flash system_a system.img_sparsechunk.1
      
      fastboot flash system_a system.img_sparsechunk.2
      
      fastboot flash system_a system.img_sparsechunk.3
      
      fastboot flash system_a system.img_sparsechunk.4
      
      fastboot flash system_a system.img_sparsechunk.5
      
      fastboot flash system_a system.img_sparsechunk.6
      
      fastboot flash system_a system.img_sparsechunk.7
      
      fastboot flash system_a system.img_sparsechunk.8
      
      fastboot flash system_b system_other.img_sparsechunk.0
      
      fastboot flash system_b system_other.img_sparsechunk.1
      
      fastboot flash system_b system_other.img_sparsechunk.2
      

   3. Toggle back to bootloader. Do the following:

      fastboot reboot bootloader 
      fastboot erase ddr 
      fastboot erase userdata (Optional except you want to wipe) 
      fastboot reboot

   4. Now your device will reboot into bootloader with the firmware you installed.

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.