Motorola Moto G 5G Stock Firmware Collections [Back To Stock ROM]

On this page, we have shared the download link and guide to install the Moto G 5G (burton) firmware flash file using the ADB Fastboot method. To flash the Moto G 5G back to stock ROM, you need the stock firmware zip files which you will find here.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Moto G 5G

Moto G 5G Specifications:

The Moto G 5G features a 6.7-inch IPS LCD panel with support for HDR10. It has a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. The phone features the new Qualcomm Snapdragon 750G, which is an upper-midrange smartphone processor from Qualcomm. It is built on an 8nm manufacturing process, which means it is quite efficient. The Snapdragon 750G is an octa-core processor with two Kryo 570 cores clocked at 2.2 GHz and six Kryo 570 cores clocked at 1.8 GHz.

Coming to the cameras, we get a triple camera setup at the back and a single front camera. The rear camera setup consists of a 48MP sensor with an f/1.7 lens, an 8MP ultrawide sensor with an f/2.2 lens, and a 2MP macro sensor with an f/2.4 lens. Coming to the front, we get a single 16MP sensor with an f/2.2 lens. The rear camera is capable of capturing 4K videos, but the front camera is limited to 1080p videos.

For connectivity, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.1, GPS, NFC, FM Radio, and USB Type-C 2.0. We get a 5,000 mAh battery with the Moto G 5G, and it supports up to 20W fast charging. It is available in two color options: Volcanic Gray and Frosted Silver. For a price tag of 20,999 INR, this phone makes for a bargain with a competent processor and impressive camera specifications.

The Advantage of Stock Firmware

  • Flash Stock To Unbrick your Moto G 5G
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Moto G 5G
  • Unroot or Fix Bugs on your Phone
  • To fix the lag or stutter on Moto G 5G.
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Steps to Install Moto G 5G Stock Firmware:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.



We at cannot be held responsible if anything goes wrong. Take your own risk!

Download Flash Files:

Moto G 5G Stock Firmware Europe XT2061-3:

Build Number Security Patch/Changelog
QPBS30.188-58-2 Android Security Patch
QPB30.188-58 Android Security Patch

Moto G 5G Stock Firmware Retail Unit:

Build Number Security Patch/Changelog
QPBS30.188-58-2 Android Security Patch
QPB30.188-58 Android Security Patch
QPBS30.188-48-3 Android Security Patch

Moto G 5G Stock Firmware India XT2061-3:

Build Number Security Patch/Changelog
QPBS30.188-58-2 Android Security Patch
QPB30.188-58 Android Security Patch

Instructions to Install: via ADB Sideload Method

  1. Now go to the folder where you have extracted the ADB and Fastboot Tools.
  2. Download Stock ROM for Moto from the above list of Moto Stock Firmware Collections and save it in the ADB folder.
  3. Now Reboot Moto smartphone to Recovery Mode.
  4. Select Apply Update from ADB.
  5. Plug the Phone into PC using USB Cable, then open a command prompt window by pressing Shift Key + Right Mouse Click
  6. Now execute the below command on the CMD screen.
    fastboot flash partition gpt.bin 
    fastboot flash bootloader bootloader.img 
    fastboot flash bluetooth BTFM.bin 
    fastboot flash dsp dspso.bin 
    fastboot flash radio radio.img 
    fastboot flash logo logo.bin
  7. Now toggle to fastbootd
    fastboot reboot fastboot
  8. Again flash the following command
    fastboot flash boot boot.img 
    fastboot flash recovery recovery.img 
    fastboot flash dtbo dtbo.img 
    fastboot flash vbmeta vbmeta.img 
    fastboot flash super super.img_sparsechunk.0
    fastboot flash super super.img_sparsechunk.1
    fastboot flash super super.img_sparsechunk.2
    fastboot flash super super.img_sparsechunk.3
    fastboot flash super super.img_sparsechunk.4
    fastboot flash super super.img_sparsechunk.5
    fastboot flash super super.img_sparsechunk.6
    fastboot flash super super.img_sparsechunk.7
  9. Toggle back to bootloader. Do the following:
    fastboot reboot bootloader 
    fastboot erase carrier 
    fastboot erase metadata 
    fastboot erase ddr 
    (Optional except you want to wipe) 
    fastboot erase userdata 
    fastboot reboot
  10. Wait until the Installation process Completes.
  11. Once the installation completed, reboot the Phone.

That’s it! Wait patiently until the flashing process completes if you have any queries related to the flashing process. Please leave a comment down below.

Manually Update Moto G 5G Stock Firmware via Recovery

  1. First of all, Go to Settings –> About Phone –> Tap on Build Number 7 Times.
  2. Go to Developer Options –> Enable USB Debugging.
  3. Download Android Nougat for Moto from above and save it in Internal storage.
  4. Now Reboot Moto to Recovery Mode.
  5. Select Apply Update from SD Card.
  6. Select the Downloaded ZIP file from SD Card.
  7. Wait until the Installation process Completes.
  8. Once the installation completed, reboot the Phone.

That’s it!! You have successfully installed Stock Firmware On Moto G 5G Smartphone.

I hope you installed the Stock ROM on Moto G 5G successfully, Now please rate this website with your comment. We always welcome feedback and improvements.


  1. Can i flash stock rom on motog 5g without unlocking bootloader,or its necessary to unlock bootloader first then flash stock firmware

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.