The OnePlus 12 has been released in India as the first flagship phone with Qualcomm’s Snapdragon 8 Gen 3 chip. It comes with a 50-megapixel primary camera with a Sony LYT-808 sensor and a 64-megapixel telephoto camera with 3x optical zoom. The company has also launched the OnePlus 12R, essentially a rebranded version of the OnePlus Ace 3 that was previously released in China. The OnePlus 12 and 12R run on Android 14-based OxygenOS 14 straight out of the box.
If you own a OnePlus 12 or 12R smartphone or plan to purchase one, this guide is tailored to meet your needs. In this tutorial, we will provide you with the latest OnePlus 12 and 12R firmware flash files and guide you through the process of installing them on your device.
Also Read
Android enthusiasts often experiment with custom ROMs or modifications to access additional features or customization options. However, these modifications can sometimes lead to performance issues, errors, or lags. In such cases, reverting to the stock ROM may resolve these problems. Although a factory reset can sometimes fix these issues, there may be instances where it is not sufficient, necessitating the reinstallation of the stock ROM. By flashing the stock firmware on your device, you can restore its original performance, providing an experience similar to that of using a brand-new device.
Page Contents
OnePlus 12 and 12R Device Overview:
The OnePlus 12 and OnePlus 12R, both running on OxygenOS 14 based on Android 14, offer a range of advanced features tailored to different user needs.
The OnePlus 12 stands out with its larger 6.82-inch quad-HD+ LTPO 4.0 AMOLED screen, offering a higher resolution and peak brightness compared to the OnePlus 12R’s 6.78-inch 1.5K display. Both devices feature high refresh rates and Gorilla Glass Victus 2 protection, but the OnePlus 12 pushes the limits with a peak brightness of 4,500 nits and a dynamic refresh rate ranging between 1Hz and 120Hz. Powering the OnePlus 12 is the more advanced Qualcomm Snapdragon 8 Gen 3 processor, while the OnePlus 12R utilizes the Snapdragon 8 Gen 2 chip, indicative of the OnePlus 12’s edge in processing power.
Camera capabilities also distinguish the two models. The OnePlus 12 boasts a triple rear camera setup with a 50-megapixel primary camera, a 48-megapixel ultra-wide-angle camera, and a 64-megapixel periscope telephoto camera, all fine-tuned by Hasselblad for exceptional photography. In contrast, the OnePlus 12R features a simpler setup with a 50-megapixel primary camera, an 8-megapixel ultra-wide-angle camera, and a 2-megapixel macro camera. Both phones have impressive front cameras, but the OnePlus 12 again takes the lead with a 32-megapixel selfie camera compared to the OnePlus 12R’s 16-megapixel one.
In terms of battery and charging, the OnePlus 12 offers a slightly larger 5,400mAh battery, supporting both 100W wired and 50W wireless charging, along with 10W reverse wireless charging. The OnePlus 12R, on the other hand, houses a 5,000mAh battery, compatible with 100W wired charging but lacks wireless charging options. Both phones share similar connectivity options, though there are slight differences, like the OnePlus 12R having Bluetooth 5.3 instead of the OnePlus 12’s Bluetooth 5.4. Additionally, the OnePlus 12’s IP65 rating for dust and splash resistance adds an extra layer of durability compared to the 12R.
What is a Stock ROM?
This guide is for you if you face issues like screen freezing, touch unresponsiveness, camera error, app loading time lag, etc. Even your OnePlus 12 and 12R device may get bricked or stuck in a boot loop issue. Installing the Stock ROM on the handset will get everything on track. Meanwhile, you can install the fresh Stock Firmware on the OnePlus 12 and 12R or update the system software.
Google’s Android OS is based on open-source software and runs on the Linux platform. Due to its customizable options, advanced users or developers can install Custom ROMs, Kernels, Mod files, and more. But sometimes, things don’t go the right way, and you may find errors, stability, or performance issues on your device. In these cases, installing Stock Firmware will come in handy.
Advantage of Stock Firmware
- Flash Stock ROM to Unbrick your device.
- Fix the device boot loop issue.
- Upgrade and Downgrade the Stock software version.
- Unroot the device easily.
- Fix the lag or software issues on the OnePlus 12 and 12R.
- Revert back to Stock ROM to gain device warranty again (if any).
OnePlus 12 Firmware Flash Files
Software Version | Changelog |
OxygenOS 14.0.0.230
CPH2573 India: Firmware File PJD110 China: Firmware FIle CPH2581 Europe: Firmware FIle CPH2583 USA: Firmware FIle |
|
All Hybrid ROM for OnePlus 12
PJD110: |
Hybrid ROM means it supports flashing from both fastboot and TWRP, so it makes no changes to the original ROM.. |
We will keep updating the firmware details whenever a new update is available for this device.
Steps to Install Stock Firmware on OnePlus 12 and 12R
Before installing the stock ROM on your OnePlus 12 and 12R, follow all the pre-requirements first and install the required drivers, firmware, and other tools on your PC.
Pre-Requirements:
- The firmware is only supported for the OnePlus 12 and 12R models. Don’t try it on other devices.
- You will also require a Windows PC/Laptop and a USB cable.
- Make sure to download the latest OnePlus USB Drivers on your Windows and MAC computer and install it.
- Download the ADB Fastboot tool on your PC and install it.
- Keep your device battery charged at least up to 60% before installing the firmware.
- Take a complete backup of your phone data without Root.
Disclaimer:
via OplusFlashTool
First Method via Local upgrade
Watch our video tutorial to flash via local upgrade
- Download the firmware OTA zip file from above and move it to the internal storage on your OnePlus 12 and 12R device.
- Head to Settings > System Updates > tap on the gear icon > use the Local Upgrade.
- Select the firmware file that you’ve downloaded before.
- You will see a pop-up screen to upgrade your device; tap on Upgrade Now.
- Next, the device will reboot and flash the OTA file via Stock Recovery.
- The device will boot into a new system.
- Then turn off the phone > press and hold the Volume Down + Power button together for a few seconds to enter into recovery mode.
- Go to Wipe data and cache & select Erase everything.
- Once done. Reboot your device.
- You’re done. Enjoy!
Second Method Via Fastboot Method
Fastboot Method commands
fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash modem modem.img fastboot flash recovery recovery.img fastboot --disable-verity flash vbmeta vbmeta.img fastboot --disable-verity flash vbmeta_system vbmeta_system.img fastboot reboot fastboot fastboot flash abl abl.img fastboot flash aop aop.img fastboot flash bluetooth bluetooth.img fastboot flash devcfg devcfg.img fastboot flash dsp dsp.img fastboot flash featenabler featenabler.img fastboot flash hyp hyp.img fastboot flash imagefv imagefv.img fastboot flash keymaster keymaster.img fastboot flash logo logo.img fastboot flash oem_stanvbk oem_stanvbk.img fastboot flash odm odm.img fastboot flash qupfw qupfw.img fastboot flash storsec storsec.img fastboot flash tz tz.img fastboot flash uefisecapp uefisecapp.img fastboot flash xbl xbl.img fastboot flash xbl_config xbl_config.img fastboot flash system system.img fastboot flash vendor vendor.img fastboot flash product product.img fastboot reboot
Watch our video tutorial to flash using the Fastboot method
If you want to install the Stock ROM on your OnePlus 12 and 12R handset manually, follow the guide below. We have shared the ADB Sideloading method to flash the Stock ROM on your OnePlus device.
We assume that this article is helpful to you and that you’ve successfully updated or installed the Stock ROM flash file on your OnePlus 12 and 12R device. If you have any queries, let us know in the comments below.
I need to speak to the admins about the EDL files link posted here.
I desperately need the OnePlus 12 firmware .my phone is bricked and can’t download the firmware ,it’s the US version.Every time o try to open the page for firmware on the getdroidtips , I get a notification saying , that it is “not available on this server, that is all we know” is the firmware not available anymore …Desperate …any help us greatly appreciated ..
Will someone from the admin team reach out to me on my Email?