POCO C40 is equipped with an immersive 6.71 inch Dot Drop display, a 6000 mAh (typ) high-capacity battery, 13MP dual camera, and a high-performance octa-core processor. On this page, we will share all the latest Poco C40 (codenamed: frost) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash Tool, which works on Windows, Mac, and Linux. You can follow this guide to flash the firmware stock ROM file on Poco C40.
Xiaomi Poco C40 Device Overview:
The Poco C40 is a smartphone that comes in two RAM and storage configurations: 3GB of RAM and 32GB of internal storage, and 4GB of RAM and 64GB of internal storage. Both models support expandable storage of up to 1TB, although the available storage and RAM are less than the total memory due to the operating system and pre-installed software on the device.
The device has a 6.71″ Dot Drop display with a resolution of 1650 x 720 HD+ and is protected by Corning Gorilla Glass. It also features a sunlight display and a reading mode for ease of use. The phone is powered by a JLQ JR510 octa-core processor with a Mali-G52 GPU that can run up to 2.0GHz.
The Poco C40 has a 13MP dual rear camera setup that consists of a 13MP main camera with an aperture of ƒ/2.2 and PDAF AF mode, as well as a 2MP depth camera with an aperture of ƒ/2.4. The rear camera can record video up to 1920 x 1080 at 30fps or 1280 x 720 at 30fps. The front-facing camera has a 5MP sensor with an aperture of ƒ/2.2 and can also record video up to 1920 x 1080 at 30fps or 1280 x 720 at 30fps.
The device comes with a 6000mAh battery that supports 18W fast charging, although the in-box charger is 10W. It also features a rear fingerprint sensor for security and authentication. The Poco C40 has dual-SIM support and is compatible with 4G, 3G, and 2G networks. It supports Bluetooth 5.0 and Wi-Fi Protocol: 802.11a/b/g/n/ac wireless networks. The phone has an IP52 rating for water and dust resistance and supports navigation through GPS, GLONASS, Galileo, and BeiDou.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Poco C40 Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adware from Poco C40
- You can fix the boot loop issue on Poco C40
- Fix Unfortunately; the app has stopped errors on Poco C40
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot Poco C40
- To Reset or Remove FRP on your device:
- Restore Poco C40 to Factory State
How to install Stock Firmware on Poco C40
Before installing, follow the pre-requisite and install the necessary drivers and tools on your PC.
- This Flash File is for Poco C40.
- You should have a working Windows PC/Laptop
- Download and Install the latest Xiaomi USB Driver for Windows and MAC.
- Download and Install the Xiaomi Mi Flash tool on your PC (Fastboot Method)
- Charge your phone to at least 50% before upgrading your phone.
- Take a complete backup of your phone data
Download Flash Files
Global Stable ROM:
|Version and Download Link||Changelog|
Europe Stable ROM:
|Version and Download Link||Changelog|
Please note that GetDroidTips cannot be held responsible for any damages, either internal or external, that may occur to your device as a result of following this guide. We advise you to proceed only if you have a good understanding of what you are doing and are confident in your ability to follow the instructions correctly. Your caution and care are appreciated.
Instructions to Flash The ROM:
To install MIUI Flash files on your Poco C40, we have given two methods, either you can follow the recovery method, or you can follow the Fastboot method. A detailed guide on both methods is given below:
Guide to Install Stock ROM On Xiaomi Devices
I hope you installed the firmware file on Poco C40 (frost) successfully; now, please rate this website with your comment. We always welcome feedback and improvements.