Advertisements

Poco M3 QCN File | Repair and Fix IMEI baseband

Are you a Xiaomi Poco M3 (citrus) device user and facing issues with the invalid IMEI or unknown IMEI baseband? Then don’t worry. We got you covered. Here in this guide, we’ve provided the full guide to repair unknown IMEI baseband on the Poco M3 device easily.

Now, talking about the IMEI (International Mobile Equipment Identity) number, it’s a unique 15-digit code that precisely identifies the device model whether you’ve used a SIM card or not. It’s worth mentioning that each and every IMEI number is unique and individually assigned to each and every mobile phone worldwide. You can also check the IMEI number on Poco M3 by typing the *#06# on the dialer or Phone app.

We all know that a SIM card can be changed easily from a mobile phone. Therefore, the IMEI number comes in handy to track any particular device across the globe. Now, if you want to use a mobile device to use a SIM then it’s necessary to work the IMEI number properly. Meanwhile, the IMEI number can get corrupted or invalid, or null while flashing any third-party firmware or any custom file on your device. Therefore, you should fix that issue for your Poco M3 model.

Poco M3 QCN File | Repair and Fix IMEI baseband

Poco M3 Specifications

The smartphone features a 6.53 inch IPS LCD with an FHD+ resolution and an aspect ratio of 19.5:9. This is not a high refresh rate panel like some other Poco devices. Under the hood, we have the mid-range Qualcomm Snapdragon 662 which comes with the Adreno 610 GPU. This is not a blazing fast processor by any means, but it can handle most tasks quite easily. It is one of the most widely used processors for mid-range or budget Android devices.

At the back, we get a dual-tone design with one tone holding the triple camera setup. Here, we get a 48 MP primary sensor with an f/1.8 lens, a 2 MP macro sensor with an f/2.4 lens, and a 2 MP depth sensor with an f/2.4 lens. The primary comes with phase detection autofocus for better focus speeds. As for the front side, we get a single 8 MP sensor with an f/2.1 lens. It is housed in a water drop style at the top.

We get two storage variants with the Poco M3 with only a single RAM option: 4GB+64GB and 4GB+128GB. In terms of connectivity, we do get all the basics, Wi-Fi 802.11, Bluetooth 5.0, GPS, Infrared port, FM radio, and USB Type-C 2.0. But the most striking features of the device are its huge 6,000mAh battery and dual speaker setup for stereo. It supports fast charging of up to 18W and one can even charge other devices using the Poco M3, that is it even doubles up as a power bank for other devices. We get three colour options with this smartphone: Cool Blue, Poco Yellow, and Power Black.

Steps to Repair and Fix IMEI number on Poco M3 (citrus)

Here you will get an easy guide to repair and restore the IMEI number on your Xiaomi Poco M3 device by using the QCN Rebuilder Tool. This tool is free of cost and easy to use even if you’re new to this process. Now, before heading over to the guide, let’s follow all the requirements and download the links below.

Now, let’s check out the download links and requirements below.

Download Files:

Pre-Requirements:

  • This guide and QCN file are for the Poco M3 model only.
  • Your device should be charged up to 50% at least.
  • A PC/Laptop and a USB cable are required.
  • Keep a full backup of the device data before doing anything.
  • Enable USB Debugging. Check the video guide.
  • Download all the files and tools from above.

Disclaimer:

Flashing IMEI manually is not legal in some of the regions. You should check with the law of your region about it. GetDroidTips only provides guides. You will be solely responsible if you proceed.

Reset EFS Partition:

adb shell
su
dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst1
dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst2
dd if=/dev/zero of=/dev/block/bootdevice/by-name/fsg
dd if=/dev/zero of=/dev/block/bootdevice/by-name/fsc

IMEI Rebuilding and Restore Guide

  • After downloading, install, and run the QCN Rebuilder tool on your PC.
  • Click on Open file and select the Poco M3 QCN file.
  • Now, replace the IMEI with the original IMEI number.
  • Click on Rebuild.
  • Next, connect your phone to a PC using a USB cable.
  • Open the dial pad on your device and type this code *#*#717717#*#* or use any method to enable diagnostic mode.
  • If the above code doesn’t work, use CMD on your PC by following the commands below.
adb shell
su
setprop sys.usb.config rndis,diag,adb
  • Then run the QPST tool on your computer.
  • Click on the Restore tab > select the rebuilt QCN file > click on Restore.
  • You’re done.

That’s it, guys. We hope you’ve found this guide useful for your Poco M3. If you’re facing any issues, feel free to ask in the comments below.

Advertisements

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.