Realme is never shy of launching new phones every month, especially in the budget segment. A new addition to the affordable number series of Realme is the Realme 7i. It was recently launched on the 17th of September 2020. And for those who are planning to buy an affordable phone, the Realme 7i could be the right choice for many.
In this guide, we will show you the real image of the ISP pinout and test point for the Realme 7i (RMX2103). By using the ISP PinOUT, you can easily restore the stock ROM, bypass FRP lock, or reset user data on your device via UFi Box. In this guide, we will also guide you on how to reboot into 9008 EDL Mode.
Table of Contents
What is ISP PinOUT?
ISP or In-system programming also known as in-circuit serial programming (ICSP) for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile, computer. You will find the IS Pinout connection on the logic board of your device. Therefore, you will need to remove the back panel of the handset and follow the below image to locate the pinout.
Also Read: Realme 7i Firmware flash file
Realme 7i RMX2103 ISP Pinout Image:
How to Enter EDL Mode on Realme 7i (RMX2103)
Follow this instruction carefully to boot your device into EDL Mode (aka Emergency DownLoad Mode)
Method 1: Using ADB
- Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
- Connect your device to your PC
- Open the adb command and enter the command
.\adb reboot edl
Method 2: Using Fastboot
- Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
- Boot your device into the bootloader
- Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
- now enter the command
.\fastboot oem edl
Method 3: By Hardware Test Points / Restore Your device
- Download the QDLoader driver
- Find the EDL PinOUT/Test Point on your device (refer image above to find the test point)
- To enter EDL mode, you need to use a metal tweezer or a conductive metal wire to short the points.
- Once you are done, connect your device to the PC using a USB cable
- This way, your device will enter EDL mode. Now you can open the QFil or QPST Tool to flash the firmware and restore your device.
I hope this guide was helpful to find the Realme 7i (RMX2103) ISP Testpoints.
Realme 7i Specifications:
The Realme 7i comes with a 6.50 inch IPS LCD 90Hz display with a 720×1600(HD+) resolution. It is a left punch hole full-screen display with an aspect ratio of 20:9. Under the hood, we have the Qualcomm Snapdragon 662 along with RAM of up to 8GB. Yes, it is not the best or top of the line processor, but it offers excellent value for the price, and together with the Adreno 610 GPU, it handles most tasks and games easily.
On the rear side of the device, we get a quad-camera setup consisting of a 64MP primary camera with f/1.8 aperture, an 8MP ultrawide camera with f/2.3 2MP macro sensor with f/2.4 aperture, and a 2 MP depth sensor with f/2.4 aperture. At the front of the punch hole, we get a 16MP camera with an f/2.1 aperture. In terms of battery, we get a huge 5,000 mAh battery with support for proprietary fast charging. The phone comes with 128GB of internal storage and support for microSD expansion via a dedicated slot. We get all the basics in terms of connectivity, that is, Wi-Fi 802.11 a/b/g/n/ac, GPS, Bluetooth v5.0, Type-C, 3G, and 4G along with all the necessary sensors, which include accelerometer, ambient light sensor, gyroscope, proximity sensor, and fingerprint sensor.
The phone comes with Android 10, and it is available in two color variants: using Green and Fusion Blue. The Realme 7i starts at just 11,999 INR. The USP of this device is the low price and the high refresh rate. It is not common to have a budget device so cheap using a panel that runs on 90Hz. For people looking for a budget device with a high refresh rate, the Realme 7i is an obvious choice.