On this page, we will share all the latest Xiaomi Redmi Pad SE 8.7 4G/5G (codenamed: spark/flare) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash Tool, which works on Windows, Mac, and Linux. You can follow this guide to flash the firmware stock ROM file on Redmi Pad SE 8.7 4G/5G.
The Xiaomi Redmi Pad SE 8.7 4G, released in August 2024, is a compact tablet designed for everyday multimedia and productivity use. It features an 8.7-inch IPS LCD with a 90Hz refresh rate and 600 nits of peak brightness, making it suitable for outdoor use and fluid scrolling. With a resolution of 800 x 1340 pixels, the screen offers decent clarity for browsing and watching content. The device is powered by the Mediatek Helio G85 chipset, an octa-core CPU, and Mali-G52 MC2 GPU, which provide moderate performance for multitasking and light gaming. It runs on Android 14 with Xiaomi’s HyperOS overlay and comes in storage options of 64GB or 128GB, expandable via a microSDXC card.
The Redmi Pad SE 8.7 4G is equipped with an 8 MP rear camera for basic photography and a 5 MP front camera for video calls. It includes stereo speakers, a 3.5mm headphone jack, and an infrared port, enhancing its multimedia features. The tablet supports dual-SIM functionality, has IP53 dust and splash resistance, and packs a 6650 mAh battery, with charging speeds varying between 10W and 18W depending on the region. It also supports Wi-Fi 802.11 dual-band and Bluetooth 5.3, providing reliable connectivity for everyday use.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Xiaomi Redmi Pad SE 8.7 4G/5G Stock ROM flash file on your computer.
If your device is dead, you can unbrick using the Stock ROM file
You can fix or repair the IMEI on your device using DB files from Stock ROM
Remove any malware or Adware from Xiaomi Redmi Pad SE 8.7 4G/5G
You can fix the boot loop issue on Redmi Pad SE 8.7 4G/5G
Fix Unfortunately; the app has stopped errors on Xiaomi Redmi Pad SE 8.7 4G/5G
Fix Network related issue
Patch Boot image to Root using Magisk
You can unroot Redmi Pad SE 8.7 4G/5G
To Reset or Remove FRP on your device:
Restore Redmi Pad SE 8.7 4G/5G to Factory State
How to install Stock Firmware on Xiaomi Redmi Pad SE 8.7 4G/5G
Before installing, follow the pre-requisite and install the necessary drivers and tools on your PC.
Pre-Requisites:
This Flash File is for Xiaomi Redmi Pad SE 8.7 4G/5G.
Optimization: Improved app preloading to enhance app startup speed
Please note that GetDroidTips cannot be held responsible for any damages, either internal or external, that may occur to your device as a result of following this guide. We advise you to proceed only if you have a good understanding of what you are doing and are confident in your ability to follow the instructions correctly. Your caution and care are appreciated.
Instructions to Flash The ROM:
To install MIUI Flash files on your Redmi Pad SE 8.7 4G/5G, we have given two methods, either you can follow the recovery method, or you can follow the Fastboot method. A detailed guide on both methods is given below:
I hope you installed the firmware file on Xiaomi Redmi Pad SE 8.7 4G/5G (spark/flare) successfully; now, please rate this website with your comments. We always welcome feedback and improvements.