Download Samsung A33 5G SM-A336E Firmware Flash File (Binary 1 U1)

In this tutorial, we will guide you on how to install the Samsung SM-A336E (Galaxy A33 5G) Binary 1 U1 flash file using the Samsung flash tool (also known as the ODIN flash tool). On this page, you will find the official stock firmware file for the Samsung Galaxy A33 5G SM-A336E, drivers, and flash tool.

By flashing the Stock ROM file, you can always fix the device software issues such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, etc.

Samsung Galaxy A33 5G Device Overview:

The Samsung Galaxy A33 5G features a 6.4 inches Super AMOLED panel with a 90 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. Under the hood, we get the Exynos 1280 processor built on a 5nm manufacturing process. It is an octa-core processor with two Cortex-A78 cores clocked at 2.4 GHz and six Cortex-A55 cores clocked at 2.0 GHz. For handling the graphics-intensive tasks, we have the Mali-G68. The smartphone comes with Android 12 out of the box with One UI 4.1 skin running on it.

In optics, we get a quad-camera setup at the rear and a single selfie camera at the front. The rear quad-camera setup consists of a 48MP primary sensor paired with an f/1.8 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, a 5MP macro sensor paired with an f/2.4 lens, and a 5MP depth sensor paired with an f/2.4 lens. The selfie camera at the front is a 13MP primary sensor paired with an f/2.2 lens. The front and rear camera setup can capture 4K videos at 30 fps.

The smartphone comes with four storage options: 128GB internal storage + 4GB RAM, 128GB internal storage + 6GB RAM, 128GB internal storage + 8GB RAM, and 256GB internal storage + 8GB RAM. We also get a hybrid microSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.1, GPS, NFC, and USB Type-C 2.0. And for sensors, we get an under-display fingerprint, accelerometer, gyro, and compass. Powering it all is a 5,000 mAh battery that can be topped up quickly using a 25W power adapter. The smartphone is available in four color options: Blue, Black, White, and Peach.

Samsung Galaxy A33 5G SM-A336E U1 Firmware Flash Files:

Steps to Install Firmware File on Samsung A33 5G SM-A336E

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy A33 5G, let us look at the pre-requirements first.

Pre-Requirements: 

• This Guide is for Samsung Galaxy A33 5G SM-A336E
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s look at the steps to flash Stock ROM on Samsung Galaxy A33 5G.

Installation Guide

1. Download the Samsung SM-A336E firmware flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Check out our full-depth video guide as well.

We hope that this guide will be helpful to you. If in case you’re facing any issues, feel free to ask in the comments below.