Download Samsung A03 Core SM-A032F Firmware Flash File (Binary 1 U1)

Samsung Galaxy A03 Core launched in India as an entry-level smartphone that sports a 6.5-inch HD+ Infinity-V display. Under the hood, the device is powered by Spreadtrum Unisoc SC9863A SoC paired with 2GB of RAM and 32GB of onboard storage that can be expanded via a microSD card. Furthermore, Samsung Galaxy A03 Core sports an 8 MP rear camera along with a 5 MP selfie camera. It packs a 5,000mAh battery.

In this tutorial, we will guide you on how to install the Samsung SM-A032F (Galaxy A03 Core) Binary 1 U1 flash file using the Samsung flash tool (also known as the ODIN flash tool). On this page, you will find the official stock firmware file for the Samsung Galaxy A03 Core SM-A032F, drivers, and flash tool.

By flashing the Stock ROM file, you can always fix the device software issue such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, and many more.

Galaxy A03 Core

Samsung Galaxy A03 Core SM-A032F U1 Firmware Flash Files:

Flash File Name: SM-A032F_A032FXXU1AVE2_11.0_file.zip
Build Number: A032FXXU1AVE2
Version: Binary 1 U1 Firmware
Model:
SM-A032F | Security Patch: May 2022
Android Version: 11.0
Download
Flash File Name: SM-A032F_A032FXXU1AVB3_11.0_file.zip
Build Number: A032FXXU1AVB3
Version: Binary 1 U1 Firmware
Model:
SM-A032F | Security Patch: February 2022
Android Version: 11.0
Download
Flash File Name: SM-A032F_A032FXXU1AUKE_11.0_file.zip
Build Number: A032FXXU1AUKE
Version: Binary 1 U1 Firmware
Model:
SM-A032F
Android Version: 11.0
Download

Steps to Install Firmware File on Samsung Tab A7 Lite SM-A032F

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy A03 Core, let us take a look at the pre-requirements first.

Pre-Requirements: 

  • This Guide is for Samsung Galaxy A03 Core SM-A032F
  • You need a Windows PC/Laptop and a USB cable to flash the firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy A03 Core.

Advertisements

Installation Guide

Disclaimer:

We’re at GetDroidTips won’t be responsible for any kind of damage/error that occurs to your handset while/after following this guide or flashing any file. Proceed at your own risk.
  1. Download the Samsung SM-A032F firmware flash file
  2. Extract the contents of the firmware flash file zip.
  3. Launch the ODIN application
  4. Load the firmware files in their appropriate section
  5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  6. Notice that the CO port will light up on Odin once you connect your phone.
  7. Click the Start button to install the firmware on your Samsung device.
  8. That’s it! You will see a PASS message once the installation is complete.
Follow Complete Guidelines

Check out our full-depth video guide as well.

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.