Download Samsung Galaxy A71 5G Combination ROM files and ByPass FRP Lock

Back on April 8, Samsung has unveiled its new 5G mid-range smartphone i.e., the Samsung Galaxy A71 5G. It comes with a 6.7″ Super AMOLED Plus display, 6/8GB RAM, 128GB ROM, quad rear camera setup, 4500mAh battery, and runs on Android 10.

If you are looking for combination ROM files for Samsung Galaxy A71 5G? Then you are in the right place. Now you can install the Samsung Galaxy A71 5G combination ROM file to recover your device from Google verification lock. Combination Files also knew as Binary 2 Firmware. Supported variants are SM-A716B, SM-A716S, and SM-A716U.

Well if you are someone who bought the second-hand device or you have recently performed a Factory Data Reset on your Galaxy A71 5G. Whatever the case might be, the thing is that you did a Factory Data Reset and now the device is asking you to enter the Google account to verify the real owner [Factory Reset Protection]. What if you dunno the email id or you forgot your email id and password. This is where this file becomes important.

By installing the combination ROM file, you can easily bypass the FRP lock [Factory Reset Protection] on your Galaxy A71 5G.

What is FRP Lock?

FRP lock means Factory Reset Protection which is a new security feature on Android phones. Once FRP is activated, it blocks use of your Galaxy smartphone after a factory data reset, til you log in using the same Google username and password you previously set up on it. This is one of the security measure taken by Google for its Android Devices running on the later versions of Android (after Android 5.1 Lollipop).

Let’s say, you forgot Google Account ID/ password (Gmail), or you have purchased a second-hand phone either online or via some third-party source. When you reset your Samsung Galaxy A71 5G and reboot, you will be greeted with the message “This device was reset, to continue to sign in with a google account that was previously synced on this device”, meaning that the phone is useless unless they bypass the Google account. This means you are in trouble unless you have this guide to bypass FRP lock or remove Google account on Samsung Galaxy A71 5G. So in order to bypass, you need Samsung Galaxy A71 5G Combination ROM files.

Download Samsung Galaxy A71 5G Combination ROM files

You can use this Combination ROM just in case you have troubles in bypassing Google Account or other problems or maybe you are just curious to take a look inside the ROM of this device. Before we get straight to How to Download and Install Combination ROM on Samsung Galaxy A71 5G, we would like to clear some things up:

Combination ROM is raw ROM for engineers and developers for the Samsung devices to fully read and test hardware, waterproof and other security. It helps in enabling ADB and OEM unlocking. You can also bypass FRP Google Account with a combination file.

• Combination ROM/Binary 2 Firmware is for testing and it’s not effective in fixing the hardware. It can only be used for testing bugs or software damage.
• The Combination ROM is also great for recovering IMEI number, Baseband, and more.
• After flashing this ROM, users won’t be able to perform tasks like making calls, texting messages, playing games.
• FRP, EE, and other securities are still kept.

Prerequisites: 

• Please note that this guide will only for the Galaxy A71 5G.
• You must have download latest ODIN on your PC.
• You need Galaxy A71 5G Combination ROM files
• Download and Install Samsung USB drivers on your PC.
• Make sure that you have at least a 60% charge left on your Galaxy A71 5G.

Once you have the above prerequisites, remove FRP lock on Galaxy A71 5G using ODIN: you can proceed with the instructions.

Instructions to ByPass FRP or Remove Google account on Galaxy A71 5G

Follow these instructions carefully to remove FRP lock using Samsung Galaxy A71 5G Combination ROM files on ODIN Tool:

Video Tutorial:

You can also take a look at our video guide to remove FRP lock on Galaxy A71 5G.

So that’s it, guys, this was our take on How to ByPass FRP lock using Samsung Galaxy A71 5G Combination ROM files. We hope that you found this post useful. Just in case, if you have stuck somewhere between the steps or had any questions related to the topic. Then, feel free to leave them in the comments section down below.

Samsung Galaxy A71 5G Specifications: Overview

The Samsung Galaxy A71 5G sports a 6.7 inches Super AMOLED plus display with a single punch hole, and a Full HD+ resolution. That said, it has a pixel density of 393 Pixel Per Inch (PPI), an aspect ratio of 20:9, a screen to body ratio of 88.3 percent, a resolution of 1080 x 2400 pixels, and gets protected by the Corning Gorilla Glass 3.

Coming to the internals of the Samsung Galaxy A71 5G, it sports the in-house Exynos 980 SoC, which is built on the 8nm process. This octa-core setup includes two Cortex A77 cores that clocks at 2.2GHz, and six Cortex A55 cores that clocks at 1.8GHz. To the GPU side, it sports the Mali G76 MP5 GPU. Talking about the memory side, it sports 6 and 8GB of RAM. Further, it comes with only 128GB of all UFS 2.1 internal storage. Further, this is expandable via the dedicated micro SD card slot. The device runs on the latest One UI 2.0, which is based on the Android 10.

Coming to the cameras on the Samsung Galaxy A71 5G, it sports a quad rear camera setup. This includes a primary 64MP sensor with an f/1.8 aperture value, and with PDAF. It pairs with a 12MP secondary ultra wide-angle sensor with an f/2.2 aperture value. Further, it gets a 5MP macro sensor with an aperture value of f/2.4, and finally, it gets a 2MP depth sensor with an aperture value of f/2.2. It also features the LED flash, panorama, and HDR. To the front, the smartphone comes with a 32MP sensor, with an aperture value of f/2.2. The rear camera can shoot videos in 4K, while the front camera can only shoot videos in 1080p.

The Samsung Galaxy A71 5G packs a 4,500 mAh battery and gets support for 25W fast charging tech. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, Bluetooth 5.0, A2DP, LE. GPS with A-GPS, GLONASS, GALILEO, BDS, NFC (market dependent), FM radio, and USB2.0, Type-C 1.0 reversible connector, USB On-The-Go. Sensors on board include accelerometer, gyro, proximity, compass, and ANT+. Talking about the biometric options available, it comes with an in-display fingerprint scanner, and as well as support for face unlock. The device comes in three colors i.e., in Prism Cube Black, Prism Cube Sliver, and Prism Cube Blue.