Samsung has launched its new entry-level smartphone called Samsung Galaxy M01 with Android 10 out of the box. In this guide, we will show you the real image of the ISP pinout and test point for the Samsung Galaxy M01 (SM-M015G).
By using the ISP PinOUT, you can easily restore the stock ROM, bypass FRP lock, or reset user data on your device via UFi Box. In this guide, we will also guide you on how to reboot into 9008 EDL Mode.
Page Contents
What is ISP PinOUT?
ISP or In-system programming also known as in-circuit serial programming (ICSP) for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile, computer. You will find the IS Pinout connection on the logic board of your device. Therefore, you will need to remove the back panel of the handset and follow the below image to locate the pinout.
Samsung Galaxy M01 (SM-M015G) ISP Pinout Image:
How to Enter EDL Mode on Samsung M01 (SM-M015G)
Follow this instruction carefully to boot your device into EDL Mode (aka Emergency DownLoad Mode)
Method 1: Using ADB
- Download ADB and Fastboot Tool and extract it to your PC (C:/ Drive)
- Connect your device to your PC
- Open the adb command and enter the command
.\adb reboot edl
Method 2: Using Fastboot
- Download ADB and Fastboot Tool and extract it to your PC (C:/ Drive)
- Boot your device into the bootloader
- Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
- now enter the command
.\fastboot oem edl
Method 3: By Hardware Test Points / Restore Your device
- Download the QDLoader driver
- Find the EDL PinOUT/Test Point on your device (refer to image above to find the test point)
- To enter EDL mode, you need to use a metal tweezer or a conductive metal wire to short the points.
- Once you are done, connect your device to the PC using a USB cable
- This way, your device will enter EDL mode. Now you can open the QFil or QPST Tool to flash the firmware and restore your device.
I hope this guide was helpful to find the Samsung Galaxy M01 (SM-M015G) ISP Testpoints.
Samsung Galaxy M01 Device Overview
The Galaxy M01 will be powered by Qualcomm’s Snapdragon 439 chipset coupled with 3 GB of RAM. The phone will be coming with a 32 GB of storage with a dedicated MicroSD card slot for memory expansion. The phone is 4G and is said to have Dual-SIM support. The phone will be having a long-lasting 4000 mAh of battery, unfortunately, it lacks any type of fast charging technology.
As per the sources, the entry-level M01 has a v-shape notched display of 5.26 inches using TFT LCD technology with a resolution of 720p. The screen has an aspect ratio of 19:9 with a pixel density of 320 Pixels per inches (PPI). The screen-to-body ratio is around 66%. The phone has a mediocre graphics powered by Adreno 505. It comes with Android 10 out of the box, most probably running Samsung’s One UI 2.0.
The phone is having a plastic body and could have a thickness of around 8.3mm. The phone also has a 3.5mm headphone jack. Coming to the camera, it can feature a dual-camera setup consisting of a 13 MP main camera and a 2 MP depth sensor at the back. The camera will be able to record videos at 1080p @30 fps from the back. At the front, it has a 5 MP shooter for selfie.
The phone will be having WIFI, Bluetooth 4.2 and support of all kinds of GPS like A-GPS, Glonass along with accelerometer and proximity sensors. The Samsung Galaxy M01 will be coming in Black, Blue and red colour options.