How to Install Stock ROM on Samsung SM-A125W (Firmware Guide)

On this page, we have shared the download link and guide to install the Samsung SM-A125W (Canada Samsung Galaxy A12) firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here you will find all stock firmware zip files for all the supported regions with Samsung SM-A125W.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Samsung Galaxy A12 Specs Overview

The Samsung Galaxy A12 is the Korean company’s budget offering in this world of premium and mid-range phones. It sports a 6.2-inch HD+ display with a resolution of 720×1280 pixels with a pixel density of 221 pixels per inch (ppi). It has narrow bezels to the sides with a slightly noticeable chin at the bottom. The top bezel houses the required sensors, an earpiece, and the front-facing camera in a waterdrop style notch. This makes the Galaxy A12 a great budget phone for consuming media thanks to its vibrant IPS LCD panel.

Coming to the internals, the Galaxy A12 packs a MediaTek Helio P22 (MT6762) SoC and is backed up by 3GB of RAM. It comes with a base storage of 32GB which might seem a bit too little for many people but is easily expandable up to 512GB via the micro SD card slot that it houses. Overall, the octa-core chipset should be enough to power the most basic of apps like WhatsApp, Facebook, and even play casual games that aren’t too graphic demanding. The phone is powered by a 4000 mAh battery which should suffice most people for over a day given the phone’s rather low-end specifications.

Coming to the cameras on the Galaxy A12, it boasts a dual-camera setup at the rear with a configuration of 13+2MP. The front camera is a decent 8MP sensor that is good enough for selfies under well-lit scenarios. The Galaxy A12 comes with Samsung’s OneUI skin out of the box and runs atop Android 9 Pie which is quite disappointing. Users can expect an update to Android 10 in the coming few months. Overall, the phone is of great value for people who need a very basic smartphone.

Samsung Galaxy A12 SM-A125W Flash Files:

Steps to Flash Stock ROM File on Galaxy A12 SM-A125W

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy A12, let us take a look at the pre-requirements first.

Pre-Requirements: 

• This Guide is for Samsung Galaxy A12 SM-A125W
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy A12.

Instructions to install:

1. Download the Samsung SM-A125W flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Check out our full-depth video guide as well.

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.