Download and Install Samsung Galaxy Tab S8, S8 Plus and S8 Ultra Android 14 (One UI 6.0) Update

Samsung Galaxy Tab S8, S8 Plus, and S8 Ultra came out of the box with Android 12 and later received Android 13, and now users can enjoy the major OS update of Android 14. In this guide, we will show you how to download and install the One UI 6.0 based on Android 14 on your Samsung Galaxy Tab S8, S8 Plus and S8 Ultra.

Download and Install Samsung Galaxy Tab S8, S8 Plus and S8 Ultra Android 14 (One UI 6.0) Update

Samsung Galaxy Tab S8 Ultra Device Overview

The Samsung Galaxy Tab S8 Ultra features a huge 14.6 inches Super AMOLED panel. It is a high refresh rate panel with a 120Hz refresh rate. The resolution on this panel is 1848 x 2960 pixels with an aspect ratio of 16:10. The screen is protected by corning Gorilla Glass 5. Under the hood, we have the Qualcomm Snapdragon 8 Gen 1 chip built on a 4 nm manufacturing process. It is an octa-core processor with one Cortex-X2 core clocked at 3.00 GHz, three Cortex-A710 cores clocked at 2.50 GHz and four Cortex-A510 cores clocked at 1.80 GHz. For handling the graphics-intensive tasks, we have the Adreno 730.

In terms of optics, we get a dual-camera setup at the rear and a dual-camera at the front as well. The rear dual-camera setup consists of a 13 MP primary sensor paired with an f/2.0 lens and a 6 MP ultrawide sensor paired with an f/2.2 lens. At the front, we have a 12 MP primary sensor paired with an f/2.2 lens, and a 12 MP ultrawide sensor paired with an f/2.4 lens. Both the rear and front camera setups can capture 4K videos at 60 fps.

The tablet comes in four storage options: 128GB + 8GB RAM, 256GB + 12GB RAM, 512GB + 12GB RAM, 512GB + 16GB RAM. There is also a dedicated MicroSD slot for storage expansion. For communications, we have Wi-Fi 802.11 a/b/g/n/ac/6e, Bluetooth 5.2, GPS, USB Type-C 3.2, and a magnetic connector for the S-Pen. And for sensors, we get an under-display optical fingerprint sensor, accelerometer, gyro, proximity, and compass. Powering it all is a 11200 mAh battery that can be topped up in under 90 mins using the 45W fast charging adapter. The tablet is available in only one color option: Graphite.

Android 14 and Its Features

Android 14, Google’s fourteenth major iteration and the 21st version of its renowned operating system, was unveiled on October 4. The pioneering devices graced with this fresh release were the Pixel 8 and Pixel 8 Pro, which underscored Google’s commitment to keeping its flagship devices at the forefront of technology.

This latest installment boasts a plethora of enhancements and innovative features. Among the standout additions are a revamped lock screen, a more intuitive system share sheet, and a redesigned battery-saving mode. Users can also delight in the convenience of drag-and-drop capabilities during app switches, groundbreaking Ultra HDR support for media, and the visually striking Material You-themed settings toggles. With AI-generated wallpapers and a new monochromatic theme, Android 14 not only refines functionality but also offers a refreshed aesthetic experience.

New Software Update Tracker:

Updated on December 13, 2023: Samsung has commenced the global rollout of the One UI 6.0 update for the Galaxy Tab S8, S8 Plus, and S8 Ultra, featuring the build number X700XXU5CWK7, X806BXXU5CWK7, and X906BXXU5CWK7. This update introduces the latest features from Android 14 and incorporates the security patch from November 2023, enhancing the device’s functionality and bolstering its security measures. Users can now experience an array of new features and improvements as Samsung continues to enhance the user experience on the Galaxy Tab S8, S8 Plus and S8 Ultra.

Download Samsung Galaxy Tab S8 5G Android 14 | One UI 6.0 Update:

Build Number: X706BXXS7CXE9
Security Patch: May 2024
Download Link
Build Number: X706BXXS6CXB5
Security Patch: February 2024
Download Link
Build Number: X706BXXS5CXA5
Security Patch: January 2024
Download Link
Build Number: X706BXXU5CWKA
Security Patch: November 2023
Download Link

Download Samsung Galaxy Tab S8 Android 14 | One UI 6.0 Update:

Build Number: X700XXS7CXE9
Security Patch: May 2024
Download Link
Build Number: X700XXS5CXB2
Security Patch: February 2024
Download Link
Build Number: X700XXU5CWK7
Security Patch: November 2023
Download Link

Download Samsung Galaxy Tab S8 Plus Android 14 | One UI 6.0 Update:

Build Number: X800OPS7CXE9
Security Patch: May 2024
Download Link
Build Number: X800XXS6CXB4
Security Patch: February 2024
Download Link
Build Number: X806BXXU5CWK7
Security Patch: November 2023
Download Link

Download Samsung Galaxy Tab S8 Ultra Android 14 | One UI 6.0 Update:

Build Number: X906BXXS7CXE9
Security Patch: May 2024
Download Link
Build Number: X906BXXS6CXB4
Security Patch: February 2024
Download Link
Build Number: X906BXXU5CWK7
Security Patch: December 2023
Download Link
Build Number: X906BXXU5CWK7
Security Patch: November 2023
Download Link

Steps to Install Android 14 (One UI 6.0) on Galaxy Tab S8, S8 Plus and S8 Ultra

Before we get straight to the steps to flash the One UI 6.0 update based on Android 14 on your Samsung Galaxy Tab S8, S8 Plus and S8 Ultra, let us look at the prerequisites first.

Pre-Requirements: 

  • Download and Install Samsung Kies Software on your computer.
  • You must download and install the latest Samsung USB Drivers on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • You will also require a Windows PC/Laptop and a USB cable.
  • Keep your Samsung Galaxy Tab S8, S8 Plus and S8 Ultra battery charged by at least 60% for a smoother process.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s look at the Steps to flash Stock ROM on Samsung Galaxy Tab S8, S8 Plus and S8 Ultra.

Disclaimer:

GetDroidTips holds no responsibility for any damage or errors that may occur to your handset during or after following this guide or flashing any files. Proceed with caution and understand that you are taking any associated risks at your own discretion.

Installation Instructions:

We offer a comprehensive installation guide for flashing the Android 14 update using the Odin Tool on your Samsung Galaxy Tab S8, S8 Plus and S8 Ultra. To successfully flash Android 14 (One UI 6.0) on your Samsung Galaxy Tab S8, S8 Plus and S8 Ultra, carefully follow the detailed instructions provided below:

Follow these steps carefully to install the Android 14 firmware on your Samsung Galaxy Tab S8, S8 Plus and S8 Ultra using Odin Tool:

    1. Download Firmware File:
      • Download the appropriate Android 14 firmware for your Galaxy Tab S8, S8 Plus and S8 Ultra.
      • Extract the contents of the firmware zip file.
    2. Odin Tool:
        • Download and extract the Odin tool on your PC.
        • Open the extracted folder and launch Odin.exe.

       

    3. Connect in Download Mode:Samsung-Download-Mode-Confirm

 

  • Connect your Galaxy Tab S8, S8 Plus and S8 Ultra to the PC while in Download Mode.
  • Odin will indicate the connection with a lit-up CO port.
  1. Select Firmware Files:
    • Click the AP button and choose the firmware file.
    • Repeat this for BL, CP, and CSC.
    • Note: For data preservation, use the ‘HOME_CSC’ file instead of the regular CSC file.
  2. Configure Odin Options:
    • Select Auto Reboot and F.Reset Time in the Options tab.
  3. Initiate Installation:
    • Click the Start button to commence the firmware installation.
  4. Completion Message:
    • Wait for the PASS message to appear, indicating the successful installation.
  5. pass-odinVideo Guide:
  6. Assistance and Comments:
    • If you encounter any issues, feel free to ask in the comments below.

By following these steps, you can successfully install the Android 14 firmware on your Galaxy Tab S8, S8 Plus and S8 Ultra using Odin Tool. We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.