How to Install Stock ROM on Moto E6 Play XT2029-1 (Firmware Guide)

The Moto E6 Play is another entry-level budget smartphone from Motorola, A Lenovo Company. The handset is equipped with a good battery, an HD+ display, a good looking design overview, and more. It was launched in November 2019 that offers a plastic body, Dual Nano-SIM support, quad-core processor, etc. It’s expected that the device will stand out well and compete with other budget category models like Xiaomi, Realme, Nokia, etc.

On this page, we have shared the download link and guide to install the Motorola XT2029-1 (Moto E6 Play) firmware flash file using the SP Flash tool. Here you will find all stock firmware zip files for all the supported regions with Motorola Moto E6 Play XT2029-1.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

How to Install Stock ROM on Moto E6 Play XT2029-1 (Firmware Guide)

Moto E6 Play Specifications:

The device comes with a 5.5-inches IPS LCD display with HD+ 720×1440 pixels resolution. It also has an 18:9 aspect ratio screen and 295 PPI pixel density. The handset runs on Android 9.0 Pie with stock Android UI. It’s powered by the MediaTek MT6739 SoC, paired with PowerVR GE8100 GPU, 2GB RAM, 32GB of internal storage option (expandable up to 256GB via a MicroSD card). It’s backed by a 3,000mAh battery and the best part is that the battery is removable as well.

The phone sports a 13MP rear camera with an f/2.2 aperture lens that features PDAF, Panorama, HDR, an LED flash, etc. On the front side, the device packs a 5MP selfie camera (f/2.2) with HDR mode. The device includes a 3.5mm audio jack, Wi-Fi 802.11 b/g/n, Bluetooth 4.2, GPS, A-GPS, GLONASS, FM Radio, MicroUSB 2.0, USB OTG, etc. While the handset also features some of the major sensors like a rear-mounted fingerprint sensor, an ambient light sensor, an accelerometer, a proximity sensor, etc.

Steps to Install Moto E6 Play XT2029-1 Stock Firmware (Flash File)

Now, if you’re ready to flash the stock firmware manually on your Motorola Moto E6 Play XT2029-1 device then you need to download the ODIN flash tool, firmware file, and necessary drivers. So, without wasting any more time, let’s get into it.



GetDroidTips will not be held responsible for any kind of hardware or software damage to your device by following this guide. Proceed at your own risk

Motorola Moto E6 Play XT2029-1 Firmware Flash Files:

Flash File Name: POAS29.550-132-25
Model: XT2029-1
Region: Latin America
Android Version: 9.0
Latin America: Download
Flash File Name: POA29.550-132
Model: XT2029-1
Region: Latin America
Android Version: 9.0
Latin America: Download

Firmware Installation Guide:

Check out the firmware flashing guide below for the Motorola Moto E6 Play XT2029-1. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

bootloader mode

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Motorola Moto E6 Play into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

device rescue Motorola Rescue and Smart Assistant Tool

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

  1. Make sure you follow and download all the required files and flash tool on your PC.
  2. Now first extract the download flash file zip to a new folder.
  3. Open the flash tool exe file to open the SP Flash Tool User InterfaceSP Flash Tool Folder
  4. Once your load the SP Flash tool UI, Tap on the Download option
    SP Flash Tool Screen
  5. In the download tab, you have to load both the download agent and the scatter text file in the scatter-loading section.
  6. You will find the scatter text file inside the ROM package for most cases, if not, you can create a scatter text file on your own.
  7. Once you load the file, click the Download buttonSP Flash Tool Download Button
  8. To start the upgrade process of stock ROM on your Motorola XT2029-1, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  9. When the phone connects, your device will start upgrading the stock firmware
  10. You need to wait for a few minutes to complete the upgrade process.
  11. Once the flashing process completes, you will find a green button which means a successful upgrade. sp green ring
  12. That’s it! You can reboot your Motorola XT2029-1

Follow our full-depth video guide below:

Guide to Install Stock ROM using SP Flash tool – Video Tutorial

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.