How to Install Stock ROM on Moto G 5G XT2113-3 (Firmware Guide)

The Moto G 5G was unveiled on the 5th of November, and it is now available for purchase in some parts of the world. The G series from Motorola is known worldwide for the value it provides besides being a budget device. As the name suggests, this a 5G smartphone from the G series Moto phones, and here we will see what this smartphone has on offer for us.

On this page, we have shared the download link and guide to install the Motorola XT2113-3 (Moto G 5G) firmware flash file using the fastboot method. Here you will find all stock firmware zip files for all the supported regions with Moto G 5G XT2113-3.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

How to Install Stock ROM on Moto G 5G XT2113-3 (Firmware Guide)

Steps to Install Motorola XT2113-3 Stock Firmware (Flash File)

Now, if you’re ready to flash the stock firmware manually on your Moto G 5G XT2113-3 device then you need to download the flash tool, firmware file, and necessary drivers. So, without wasting any more time, let’s get into it.

Pre-Requirements:

Disclaimer:

GetDroidTips will not be held responsible for any kind of hardware or software damage to your device by following this guide. Proceed at your own risk

Moto G 5G XT2113-3 Firmware Flash Files:

Flash File Name: RZKS31.Q3-25-15-7
Model: XT2113-3
Region: Europe
Android Version: 11
Download
Flash File Name: QZKS30.Q4-40-81-3-4
Model: XT2113-3
Region: Europe
Android Version: 10.0
Download
Flash File Name: QZK30.Q4-40-26-1
Model: XT2113-3
Region: Europe
Android Version: 10.0
Download

Firmware Installation Guide:

Check out the firmware flashing guide below for the Moto G 5G XT2113-3. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

bootloader mode

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Moto G 5G into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

device rescue Motorola Rescue and Smart Assistant Tool

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

    1. The next step is to open the command window and go to the adb folder Open Command Window here
    2. Enter the following command to flash the firmware.
      fastboot flash partition gpt.bin 
      fastboot flash bootloader bootloader.img 
      fastboot flash bluetooth BTFM.bin 
      fastboot flash dsp dspso.bin 
      fastboot flash radio radio.img 
      fastboot flash logo logo.bin
    3. Now toggle the fastbootd
      fastboot reboot fastboot
    4. Again flash the following command
      fastboot flash boot boot.img
      fastboot flash recovery recovery.img
      fastboot flash dtbo dtbo.img
      fastboot flash vbmeta vbmeta.img
      fastboot flash super super.img.sparsechunk.0
      fastboot flash super super.img.sparsechunk.1
      fastboot flash super super.img.sparsechunk.2
      fastboot flash super super.img.sparsechunk.3
      fastboot flash super super.img.sparsechunk.4
      fastboot flash super super.img.sparsechunk.5
      fastboot flash super super.img.sparsechunk.6
      fastboot flash super super.img.sparsechunk.7
      fastboot flash super super.img.sparsechunk.8
    5. Toggle back to bootloader. Do the following:
      fastboot reboot bootloader
      fastboot erase carrier
      fastboot erase metadata 
      fastboot erase ddr
      (Optional except you want to wipe) fastboot erase userdata
      fastboot reboot
    6. Now your device will reboot into bootloader with the firmware you installed.

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.